Table of Contents
Advertisement
To connect a USB 3.0 cable to the device:
1. Connect the USB cable to the charging head.
2. Locate the Charger/Accessory jack.
3. Open the jack cover, as shown.
4. Insert the USB 3.0 cable into the device's
Charger/Accessory jack.
5. Plug the charging head into a standard AC power
outlet. The device turns on with the screen locked and
indicates both its charge state and percent of charge.
Important! While the device is charging, if the touch screen
does not function due to an unstable power supply
unplug the USB power adapter from the power
outlet or unplug the USB cable from the device.
6. When charging is finished, first unplug the charger's
power plug from the AC wall outlet, then disconnect
the charger's connector from the device.
7. If you are using the older style USB 2.0 cable to charge
your battery, plug the flat end of the cable into the
smaller port in the device's Charger/Accessory jack.
USB 3.0
connector
8. When charging is finished, first unplug the charger's
power plug from the AC wall outlet, then disconnect
the charger's connector from the phone.
9. Close the Charger/Accessory jack cover.
USB 2.0
connector
3
4 4
Getting Started
10
Advertisement
Table of Contents
