Flanders 11255 Series Catalog
  1. Manuals
  2. Brands
  3. Flanders Manuals
  4. Air Cleaner
  5. 11255 Series
  6. Catalog

Flanders 11255 Series Catalog

Air filters for replacement
Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 11255 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Flanders 11255 Series

Summary of Contents for Flanders 11255 Series

  • Page 4 Disposable Air Filters The widest selection of disposable panels you will find anywhere. Spun glass and synthetic media...all stan- dard sizes and almost any “special” size. Polyester Panels, Links, Sleeves High grade polyester synthetic fiber media in a variety of styles, heat sealed onto heavy wire frames.

  • Page 5: Hepa Filter

    Gas Phase and Odor Control Pleated panel filters that have been treated with special odor adsorbing/neutralizing materials, as well as 50% & 75% fill granular carbon filters. HEPA Filter For genuine HEPA grade filtration with mum efficiency of 99.97% on 0.30 micrometer size particles.

  • Page 6: Table Of Contents

    Disposable Air Filters: HD Industrial Grade Heavy Duty Box Frame, Spun Glass or Synthetic Media ....8 EZ Flow and EZ Flow II Continuous Filament Spun Glass, Box Frame Pinch Frame Framed Polyester Media with Metal on One Side .

  • Page 7: Model Numbers

    Air Cleaner Housings ........

  • Page 8: Heavy Duty Box Frame, Spun Glass Or Synthetic Media

    Support Grille: Perforated corrosion-resistant steel orex- panded wire on both sides of the filter Sealant: Hot-melt resin Spun Glass Flanders - Foremost in Air Filtration Spun Glass Media - Model 10255.xxxxxx Synthetic Media - Model 11255.xxxxxx Grille Sizes - Model 10355.xxxxx Synthetic...

  • Page 9: Standard Sizes

    Standard Sizes Nominal Size (in.) Actual Size H x W x D (in) 10x10x1 9-7/8 x 9-7/8 x 3/4 10x20x1 9-7/8 x 19-7/8 x 3/4 10x24x1 9-7/8 x 23-7/8 x 3/4 10x25x1 9-7/8 x 24-7/8 x 3/4 10x30x1 9-7/8 x 29-7/8 x 3/4 12x12x1 11 -7/8 x 11 -7/8 x 3/4 12x20x1...

  • Page 10: Important Features

    General EZ Flow and EZ Flow II disposable filters are designed for protection of furnace and central air units in residential and light commercial applica- tions. Construction of both models is identical except for the media retainer. The EZ Flow features a metal media retainer on the downstream side while the EZ Flow II has no media retainer.
  • Page 11 Standard Sizes Nominal Size (inch) Actual Size H x W x D (in) 10x10x1 9-7/8 x 9-7/8 x 3/4 10x20x1 9-7/8 x 19-7/8 x 3/4 10x24x1 9-7/8 x 23-7/8 x 3/4 10x25x1 9-7/8 x 24-7/8 x 3/4 10x30x1 9-7/8 x 29-7/8 x 3/4 12x12x1 11 -7/8 x 11 -7/8 x 3/4 12x20x1...

  • Page 12: Physical Data

    General The Flanders Pinch Frame disposable air filter pro- vides the user with a product of high quality and strength. Originally designed for light commercial and indus- trial applications, the Flanders Pinch Frame filter is an excellent choice for use in residential furnace systems.
  • Page 13 Standard Sizes Nominal Size (inch) Actual Size H x W x D (inches) 10x20x1 9-7/8 x 19-7/8 x 7/8 10x24x1 9-7/8 x 23-7/8 x 7/8 10x30x1 9-7/8 x 29-7/8 x 7/8 12x20x1 11 -7/8 x 19-7/8 x 7/8 12x24x1 11 -7/8 x 23-7/8 x 7/8 12x25x1 11 -7/8 x 24-7/8 x 7/8 12x27x1...

  • Page 14: Heat Sealed Polyester Support Frame Products

    Rugged, Heat-sealed,Construction Flanders Ring Panel and Cube filters are made by heat sealing layers of syn- thetic filtering media together over an interior, corrosion-resistant steel support frame. An overcut of media outside the seal- forms a built-in gasket (selvage) between the wire support frame and holding frame, which secures the filter and prevents air bypass.
  • Page 15 Series ST55-Polyester Panel Models ST55R-xxxx Ring Panel and ST55L-xxxx Link Two-ply 1” nominal media construction using a 1/2” nominal white poly- ester on the upstream, followed by a 1/2” nominal green super tackified polyester downstream. Series 225T-Polyester Panel or Cubes Models 225RT-xxxx Ring Panel, 225LT-xxxx Link, CUBx225T-xxxxxx Cube Two-ply 1”...

  • Page 16: Prep Station

    Paintbooth Filtration Flanders offers a wide variety of filtration products for Downdraft downdraft and crossdraft paintbooths and prep sta- tions. For the most part, fitlration products required for all of these fall into three general categories which are color coded to the drawings at left which indicate their placement in each type of booth.
  • Page 17 SA600-G10 Diffusion Media for Air Intake Models SA600-xxx For downdrafts and prep stations. This filter pro- vides the highest level of protection against paint damaging particles available today. In addition to its leading reputation in filtering ability, the SA600- G10 is able to withstand high temperature applica- tions, up to 140 degrees Celcius! This filter does not discolor or break down in the heated booth environment.
  • Page 18 Series ST55 Panel for Air Intake Models ST55R-xxxx and ST55L-xxxx-xx The SERIES ST55 PANEL, made in the USA, is an economical choice for crossdraft booths. SERIES ST55 is made from two media pads. A metal support is dielectrically heat sealed in between the two media layers, providing support and rigidity.
  • Page 19 Series 331Y PA Models 331Y-xxx 22 gram Fiberglass Paint Arrestor for use in all booth types. Series 331Y is a high quality fiberglass media. Made with 22 grams of fiberglass per square foot, the Series 331Y is more efficient and holds more paint than many other fiberglass prod- ucts.
  • Page 20 325T, which is 98% efficient, and the Series 425T which is 99% efficient. The exhaust cube filters have a larger surface area than a conventional flat pad. This increase in surface area reduces the restriction to airflow, and increases the paint hold- ing capacity of the filter.
  • Page 21 HD Poly-T/A Models 11255.xxxxxx These are heavy duty synthetic filters for use as prefilters in downdraft booths.HD Industrial Grade filters are designed for use in any application where disposable panel filters are recommended.
  • Page 22 The filter media consists of 100% high bulk poly- ester fibers that are thermo-bonded with a fire retar- dant res” Support grilles of expanded metal are provided on both sides of the filter. The media pads and support grilles are continuously glued to the inside perimeter of the frame, resulting in excep- tional strength and rigidity.
  • Page 23 PS125-Bag Models125BAG-xxxxxx Scrim-Back polyester media bags as prefilter. PS125 Bags are made from a single denier poly- ester media that contains a scrim backing for extra rigidity. The PS125 Bags each contain a metal wire support and a 1” channel frame for easy placement. Prefilter bags have an ever-changing and diverse selection of types and sizes.

  • Page 24: Two-Stage And Three-Stage Paint Systems

    FP319A Chromate Recovery System The Flanders FP319A-Chromate Recovery System is offered in both two-stage and three-stage config- urations for aerospace overspray painting environ- ments. The FP319A complies with EPA (Environmental Protection Agency) Test Method 319 as it applies to the National Emissions Standards for Hazardous Air Pollutants (NESHAP).
  • Page 25 3. Courtaulds yellow fuel tank coating (A) 513X390 base + (B) 910X624 activator - With a conventional air gun operating at 45 psi, with spray feed rate of 105 gr/min @ 120 fpm, initial pressure drop was .23” w.g. Running to final pressure drop at .82” w.g., average removal efficiency was measured at 99.35% efficiency, with 284 grams hold- ing capacity on the first stage and 1366...

  • Page 26: Hammock, Permaire And Service Rolls And Pads

    Service Rolls Flanders Service Rolls air filtration media are man- ufactured in selected widths, prepared in roll lengths that make manageable roll sizes. In most cases, a single cut across the roll will produce a ready-to-install filter pad. The following media are offered as service rolls: Spun Glass: (Models SGxxxxKK) This is a rigid, nominal 3/8”...
  • Page 27 Typically, these are for Lennox type furnaces. (Lennox is a brand name. It is used here for system identification only.) Hammock rolls are 20 foot rolls of media cut in various widths. In most cases, a sin- gle cut across the roll will produce a ready-to-use filter pad.

  • Page 28: Fiberglass And Synthetic Media, Rolls And Pads

    Wide selection of media types Flanders offers a wide range of top quality air filtra- tion media available in bulk rolls and pads. Considering the unique characteristics of each offering, the user can get maximum value for filter dollar spent with relation to the intended use. Bulk media rolls are offered in selected slit widths with roll lengths determined by manufacturing processes.
  • Page 29 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL...

  • Page 30: Treated Polyester, Scrim Back, Skin Back, Fiberglass

    Flanders automatic roll replacements are furnished wound on spools or cores, ready for installation without modifica- tion or adaptors. A core selection guide is printed on the back of this sheet. Six-foot-long kraft paper leaders and trailers are secured to the ends of every roll. Each roll con- tains 65 linear feet of filtering media in selected widths.
  • Page 31 Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL...

  • Page 32: Wedge Pleat, Carrier Board Frame, 25-30% Efficient

    General Flanders Pre Pleat 40 extended surface pleated fil- ters are designed to operate in most every type of installation. Available in 1”, 2”, and 4” nominal thickness, these filters have an average atmos- pheric dust spot efficiency range of 25-30% per ASHRAE Standard 52.1 test methods.

  • Page 33: Principles Of Operation

    Expanded Metal Pleat Backing Double Wall Construction Efficient High-Loft Media 2-piece die-cut frame Principles of Operation Flanders’ v-pleat design insures that the greatest media area is exposed to the air flow to promote uniform dust loading. Competitive filters cannot maintain this rigid shape and tend to flatten out, using only a por- tion of the media.

  • Page 34: Performance Data

    Nominal Size Nomina H x W x D l Depth (in.) (in.) 10 x 10 x 1 10 x 20 x 1 12 x 20 x 1 12 x 24 x 1 14 x 20 x 1 14 x 25 x 1 15 x 20 x 1 16 x 20 x 1 16 x 25 x 1...

  • Page 35: Guide Specifications

    The Pre Pleat Series of Pleated Air filters 1.0 General 1.1 Medium efficiency filters shall be Pre Pleat 40 extended surface pleated filters as manufactured by Flanders.. 1.2 Filter sizes and capacities shall be as scheduled on the drawings. 1.3 Filters shall be UL 900 Class 1 or 2 listed. 2.0 Filter Construction 2.1 Filters shall be constructed of reinforced, non- woven cotton/synthetic blend media laminated to...

  • Page 36: Important Features

    General The Pre Pleat HV pleated filter from Flanders is designed to operate in high velocity and turbulent air applications where standard pleated filters have a tendency to fail. They are ideal for gas turbine and rotary machinery equipment or any area requiring a pleated filter to operate under demanding use.
  • Page 37 Nominal Depth (inch) Depth Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products. 1.0 General 1.1 High velocity Pre Pleat HV extended surface pleated filter as manufactured by Flanders. 1.2 Filter sizes and capacities shall be as scheduled on the drawings.

  • Page 38: Electrostatically Charged Fibers

    Filtration for IAQ Flanders Pre Pleat 62R pleated panel air filter was specifically designed to improve indoor air quality through a new level of particulate filtration. The fil- ter takes its name from the ASHRAE Standard 62 which addresses indoor air quality. The Pre Pleat 62R is indeed state of the art.

  • Page 39: Merv 11 Electrosttically Charged Fibers

    Pre Pleat 62RM11 re Pleat 62RM11 pleated panel filter enables a significant upgrade in collection efficiency over existing MERV 8 products at the same resistance levels. From 30-35% to 60-65% average per Ashrae 52.1-1992 average dust spot efficiency at nearly the same pricing levels.
  • Page 40 Filter pack sealed in frame at every point of contact. Telescoping frame gives double perime- ter thickness Diagonal face strips for extra strength V-wedge pleats for full media usage PrePleat 62RM11 PrePleat PrePleat 1.0 General 1.1 Air filters shall be Model Pre Pleat 62RM11 panel filers, as manufactured by Flanders.

  • Page 41: Ul Class 1 Fire Rated Filters

    General This pleated air filter is designed for applications where a UL Class 1 fire rated filter is required and metal frame filters are unsuitable because of dis- posal problems. The Pre Pleat Class 1 pleated air filter has been tested by Underwriters Laboratories, Incorporated and found to meet the stringent per- formance characteristics of a Class 1 air filter for flammability, as outlined in Standard 900.
  • Page 42 Rate of Air Flow vs Initial Resistance 1.50 1.25 1.00 0.75 0.50 0.25 1000 1500 Air Flow - CFM Efficiency vs. Dust Fed 100% Dust Fed (grams) Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products. 1.0 General 1.1 Medium efficiency UL Class 1 fire rated pleated filters shall be Pre Pleat Class 1 as manufactured...

  • Page 43: High Temperature Pleated Filters

    Up to 400 Flanders Pre Pleat HT filters are designed for increased air filtration efficiencies in an operating environment where temperatures reach 400 degrees Fahrenheit Typical examples include air intakes for drying ovens or high temperature baking applications. Construction The Pre Pleat HT high temperature pleated air filter consists of a nominal 50% dust spot efficiency micro-fine fiberglass filtration media that has been bonded to corrosion-resistant expanded metal...
  • Page 44 Rate of Air Flow vs Initial Resistance 1.50 1.25 1.00 0.75 0.50 0.25 1000 1500 Air Flow - CFM Rate of Air Flow vs Initial Resistance 1.50 1.25 1.00 0.75 0.50 0.25 1000 1500 Air Flow - CFM Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products.

  • Page 45: Installation Considerations

    General Flanders E35 extended surface pleated filters are designed to operate in most installations. Available in 1”, 2”, and 4” nominal thickness, these filters have an average atmospheric dust spot efficiency range of 25-30% per ASHRAE Standard 52.1 test methods. E35 filters offer greater efficiency and service life than disposable filters, pad and frame systems, or metal washable filters.
  • Page 46 Nominal Nominal Size (inch) Depth HxWxD (inch) E35-10201 E35-12201 E35-12241 E35-14201 E35-14251 E35-15201 E35-16201 E35-16251 E35-18241 E35-18251 E35-20201 E35-20241 E35-20251 E35-24241 E35-10202 E35-12202 E35-12242 E35-14202 E35-14252 E35-15202 E35-16202 E35-16252 E35-18252 E35-20202 E35-20252 E35-24242 E35-12244 E35-16204 E35-16254 E35-20204 E35-20254 E35-24244 E35-25294 E35-28304 PD represents clean pressure drop in inches w.g.

  • Page 47: Extended Surface Minipleat Aor Filters

    General Superflow-V extended surface area low pressure drop minipleat filters are designed for use in most commercial and industrial HVAC systems where medium to high efficiency filtration is required. Superflow-V filters are available in average efficien- cy ranges: 65%, 85%, 95% and 98% per ASHRAE Standard 52.1 test methods and 95% DOP.
  • Page 48 Efficiency Model Number 95% DOP SFVD-95A12 24 x 24 x 12 95% DOP SFVD-95B12 20 x 24 x 12 95% DOP SFVD-95C12 12 x 24 x 12 SFV-98A12 24 x 24 x 12 SFV-98B12 20 x 24 x 12 SFV-98C12 12 x 24 x 12 SFV-95A12 24 x 24 x 12...
  • Page 49 General Rigid-Air extended media surface rigid filters are designed for use in most commercial or industrial HVAC systems where medium to high efficiency fil- tration is required. They feature your selection of media backed with expanded metal and pleated. The pleats are held in place by rigid pleat separators, now available in either plastic or metal styles.

  • Page 50: All Metal

    Nominal Nominal Size Depth Efficiency H x W x D (inch) (inch) 90-95% 80-85% 60-65% 50-55% 90-95% 80-85% 60-65% 50-55% Notes: 1. PD represents clean pressure drop in inches w.g. Recommended final pressure drop for all models is 1.5 inches w.g. 2.
  • Page 51 Nominal Nominal Size Depth Efficiency H x W x D (inch) (inch) 24 x 24 x 12 90-95% 24 x 12 x 12 24 x 24 x 12 80-85% 24 x 12 x 12 24 x 24 x 12 60-65% 24 x 12 x 12 24 x 24 x 12 50-55%...

  • Page 52: Application Guidelines

    Application Guidelines Rigid-Air filters may be used wherever job require- ments and available space will accommodate 6” or 12” deep filters. Rigid-Air filters should be selected using 24” x 24” and 24” x 12” face sizes. This allows for 12” incre- ments in height and width of the filter bank and insures that replacement cartridges will be readily available.

  • Page 53: Extended Media Separator Type Rigid Filters

    General PrecisionCell extended media separator type rigid filters are designed for use in most commercial or industrial HVAC systems where medium to high effi- ciency filtration is required. PrecisionCell filters are available in average efficiency ranges of 60-65%, 80-85% and 90-95% per ASHRAE Standard 52.1 test methods and are available in standard and high capacity versions.

  • Page 54: Performance Data

    PrecisionCell Standard Capacity Filters With Single or Double Header Nominal Nominal Size Depth Efficiency H x W x D (inch) 24 x 24 x 12 90-95% 24 x 12 x 12 24 x 24 x 12 80-85% 24 x 12 x 12 24 x 24 x 12 60-65% 24 x 12 x 12...
  • Page 55 PrecisionCell Single Header filters are ideally suit- ed for upstream or downstream installation in K- Trac Filter Modules. Insert the horizontal sides of the header in the gasketed 1” secondary track of the framing system. PrecisionCell Single Header filters are rec- ommended for through-the-frame applica- tions.
  • Page 56 Application Guidelines PrecisionCell filters may be used wherever job requirements dictate totally rigid filters and available space will allow only minimal inline depth. PrecisionCell filters should be selected using 24” x 24” and 24” x 12” face sizes. This allows for 12” increments in height and width of the filter bank and insures that replacement cartridges will be readily available.
  • Page 57 General PrecisionCell HT filters are designed for high tem- perature applications up to 900 F. They feature the same rugged construction as the standard PrecisionCell. The HT version is manufactured of specially selected components to meet high temper- ature requirements. They are ideal for paint drying ovens or any appli- cation requiring high efficiency filtration at high tem- peratures.
  • Page 58 Operating Efficiency Limit 60-65% 80-85% 90-95% Notes: 1. PD represents clean pressure drop in inchw.g. The recommended final pressure drop is 2.5 inch w.g. 2. Operation down to zero velocity is satisfactory for all models. 3. Efficiencies are average and are based on ASHRAE Standard 52.1 dust spot test methods. Performance val- ues stated may be averages typical of the products listed.

  • Page 59: Extended Surface Lofted Media Box Type Filters

    General The PrecisionCell GT features heavy-duty con- struction to meet the rigorous demands of gas tur- bine rotary machinery air filtration applications. They may also be utilized where extreme velocity or turbulence have rendered other products to be inef- fective. PrecisionCell GT filters are available in ASHRAE efficiencies of 60-65% and 90-95% in either single or double header versions.
  • Page 60 Nominal Nominal Depth Efficiency Size (inch) HxWxD (inch) 24x24x12 24x12x12 24x24x12 24x12x12 Notes: 1. PD represents clean pressure drop in inchw.g. The recommended final pressure drop is 2.5 inch w.g. 2. Operation down to zero velocity is satisfactory for all models. 3.

  • Page 61: Extended Surface Minipleat Filters

    General PrecisionCell II extended surface minipleat rigid fil- ters are a nominal four inches deep. They are designed for use in most commercial and industrial HVAC systems where medium to high efficiency fil- tration is required. They are available in average efficiency ranges of 60-65%, 80-85% and 90-95% per ASHRAE Standard 52.1 atmospheric dust spot test methods.
  • Page 62 Construction In the Flanders tradition of state-of-the-art technology, PrecisionCell II filters are built with a minipleat media pack to achieve a rugged, compact lightweight, high efficiency filter. Surepleat Side Access Housings Use a Surepleat Side Access Housing as a con- venient and space-saving method of installing PrecisionCell II filters.
  • Page 63 Prefilters Prefilters are always a wise choice for the protec- tion of minipleat filters no matter what the efficiency or brand. The closely-spaced pleats are subject to face-loading (bridging) by lint and coarse particles, thus reducing their usual long life. A minimum 25- 30% ASHRAE efficiency pleated panel filter such as the Flanders Prepleat 40 is recommended.
  • Page 64 Nominal Size H x W x D (inch) Note 3 24 x 24 x 4 90-95% 24 x 12 x 4 24 x 24 x 4 80-85% 24 x 12 x 4 60-65% 24 x 24 x 4 24 x 12 x 4 Other Standard Size PrecisionCell II Filters Nominal Nominal Size...

  • Page 65: Replacement Filter Cartridges

    General EA Series Replacement Air Filters are pre-formed, extended surface deep-pleated cartridges for use with existing hardware in commercial and industrial HVAC systems. EA Series filters are available in average efficiency ranges of 25-30%, 50-55%, 80- 85% and 90-95% when tested according to ASHRAE Standard 52.1 methods.
  • Page 66 Model Actual Efficiency Number HxWxD (inch) EA-30C8 12 x 24 x 8 EA-30K8 16 x 20 x 8 EA-30D8 20 x 20 x 8 EA-30H8 20 x 25 x 8 25-30 EA-30A8 24 x 24 x 8 EA-30C12 12 x 24 x 12 EA-30A12 24 x 24 x 12 EA-55C8...

  • Page 67: Extended Surface Bag Filters

    General Precision Pak extended surface bag filters are designed for use in most commercial or industrial HVAC systems where medium to high efficiency fil- tration is required. Precision Pak filters are available in two media types: lofted fiberglass and micro-fine synthetic media with average efficiency ranges of 55%, 65%, 85%, and 95% per ASHRAE Standard 52.1 test methods.
  • Page 68 Nom. Nominal Number Width Depth (inch) (inch) Pockets Nominal Number Nom. Depth Width (inch) Pockets (inch) Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products. How to Select a Precision Pak Filter •...
  • Page 69 CAPACITIES AND DIMENSIONS Nom. Nominal Number Width Depth (inch) Pockets (inch) Nominal Number Nom. Depth Width (inch) Pockets (inch) Notes: 1.PD represents clean pressure drop in inches w.g. for synthetic media filters. Add 10% for fiberglass media Precision Pak. 2.The recommended final pressure drop for all models is 1.0 inch w.g. 3.Gross media area is approximately 7% more than the net area listed.
  • Page 70 Application Guidelines Precision Pak filters should be selected using 24” x 12” face sizes. This allows for 12” increments in height and width of the filter bank and insures that replacement filters will be readily available. Precision Pak filters should be installed with pockets vertical wherever possible.

  • Page 71: High Capacity Extra Dust Holding Bag Filters

    General Precision Pak XDH high dust holding capacity extended surface bag filters are designed for use in most commercial or industrial HVAC systems where medium to high efficiency filtration is required. Precision Pak XDH filters are available in micro-fine polyolefin synthetic media with average efficiency ranges of 75%, 85% and 95% per ASHRAE Standard 52.1 test methods.
  • Page 72 Nominal Number Nom. Depth Width (inch) Pockets (inch) Nominal Number Nom. Depth Width (inch) Pockets (inch) Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products. How to Select a Precision Pak XDH Filter: •...
  • Page 73 Installation Considerations Precision Pak bag filters may be installed in Flanders Type 9 Holding Frames, K-Trac Filter Framing Modules, Sureseal Side Access Housing or in simi- lar existing hardware. Type 9 Holding Frames are riveted together to form a bank and may be installed for upstream or down- stream service.
  • Page 74 Application Guidelines Precision Pak XDH filters should be selected using 24” x 12” and 24” x 24” face sizes. This allows for 12” increments in height and width of the filter bank and insures that replacement filters will be readily available.

  • Page 75: Moisture/Oil Mist Separators

    General Flanders models Separators are designed for use in air handling sys- tems requiring collection of water droplets or oil mist. Water droplets in outside air are usually fog. In supply air, water droplets may occur as carry over from cooling coils and evaporative media or unevaporated moisture downstream of humidifiers.
  • Page 76 Moisture separators are constructed much like permanent metal washable filters. The nominal two inch thick media pack consists of 15 individual layers of pleated and flat aluminum wire mesh. Air entering and exiting support grids are expanded metal, and the media enclosing frame is 16 ga. galva- nized steel with five 3/8”...
  • Page 77 General Flanders Model KKM is a heavy duty, washable, aluminum media, all metal filter. KKM is suitable for all residential and commercial applications. The KKM offers large filtering area, high dust hold- ing capacity, uniform loading and low resistance to air flow.

  • Page 78: Industrial Grade Aluminum Or Galvanized Filters

    Nominal Size H x W x D 10 x 20 x 1 15 x 20 x 1 16 x 20 x 1 16 x 25 x 1 20 x 20 x 1 20 x 25 x 1 10 x 20 x 2 16 x 20 x 2 16 x 25 x 2 20 x 20 x 2...

  • Page 79: Alpha Cell Hepa Filters

    General Flanders Alpha 95 Filters are designed for use in HVAC applications requiring cleaner air than is pos- sible with ASHRAE - rated filters, but where HEPA - filtered air is not required. The filters are rated at 95% efficiency on 0.30 micrometer particles by the DOP test method.
  • Page 80 Alpha 95 Filter Dimensions and Capacities Filter Depth Filter Size and Frame Actual Face Size (inches) Depth Designator 11-1/2 Construction Flanders manufactures both conventional Separator Style and Pureform Separatorless 95 DOP Filters. To make a Separator Style filter, the media is folded over corrugated aluminum separators with hemmed edges to separate the pleats in the filter pack.
  • Page 81 Frame Materials Alpha 95 Filters are available in a variety of wood and metal frame materials such as particle board, plywood, galvanized steel and stainless steel. Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter.
  • Page 82 1.0 General 1.1 Alpha 95 filters shall be extended media (sepa- rator type) (Pureform separatorless type) filters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed.

  • Page 83: Alpha Cell

    General Flanders offers a complete line of Alpha Cell HEPA Filters in two efficiencies to meet the needs of criti- cal applications where HEPA filtration is required. Individual testing, rigid quality control and modern assembly methods are used to ensure confor- mance to specifications.
  • Page 84 Alpha Cell HEPA Filter Dimensions and Capacities Frame Depth Filter Size and (Inches) Frame Depth Designator CG-F GC-F 11-1/2 YY-F YU-F GN-F CC-F GG-D GC-D BB-D CC-D YY-D YU-D GN-D 5-7/8 GP-D GQ-D GR-D GS-D NN-D NP-D NQ-D NR-D NS-D PP-D PQ-D PR-D...
  • Page 85 Frame Materials AlphaCell Filters are available in a variety of wood and metal frame materials such as particle board, ply- wood, galvanized steel and stainless steel. Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter.
  • Page 86 1.0 General 1.1 Alpha Cell HEPA filters shall be extended media (separator type) (Pureform separatorless type) fil- ters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed.

  • Page 87: Alpha 2000

    High Capacity Design The Alpha 2000 High Capacity HEPA filter is avail- able in a nominal 12” depth configuration. It is designed for optimum performance and low operat- ing costs in both new and replacement systems. With 40% more media area than the standard capacity Alpha Cell filter, the Alpha 2000 saves space, energy, and material and labor costs.
  • Page 88 Alpha 2000 HEPA Filter Dimensions and Capacities Filter Depth Filter Size and Frame Actual Face Size (inches) Depth Designator 11-1/2 NOTE: The pressure drop for fluid seal (Separator or Pureform) and scan tested Pureform filters will be approximately 15% higher. Separator or Separatorless Flanders manufactures both conventional Separator Style and Pureform Separatorless...
  • Page 89 Frame Materials Alpha 2000 Filters are available in a variety of wood and metal frame materials such as particle board, ply- wood, galvanized steel and stainless steel. Gasket and Fluid Seal The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter.
  • Page 90 1.0General 1.1 Alpha Cell HEPA filters shall be extended media (separator type) (Pureform separatorless type) filters as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. 1.3 Filters shall be (UL 900 Class 1)( UL 900 Class 2) listed.

  • Page 91: Alpha Ht

    General Flanders manufactures metal-frame separator-style HEPA filters for applications with high-temperature requirements up to 1,000°F (540°C) for exhaust air only and 500°F (260°C) for supply air. High-tem- perature filters are available with either a gasket or fluid seal. Filters with Blu-Jel Fluid Seal have a ®...
  • Page 92 1.0 General 1.1 High temperature separator style HEPA filters shall be Alpha HT models as manufactured by Flanders. 1.2 Filter sizes, capacities and construction options shall be as scheduled on the drawings. Filter Construction 2.1 The filter pack shall be constructed by pleating a continuous sheet of non-woven water-resistant fiberglass media around hemmed-edge corrugat- ed aluminum separators.

  • Page 93: Superflow 2K

    General Flanders Superflow 2K is a V-bed HEPA filter (99.99% at 0.30 micrometer) specifically designed for high airflow applications requiring HEPA effi- ciency at an ultra low pressure drop. The Superflow 2K can be incorporated into systems with air veloc- ities of 500 fpm and a pressure drop of 1.0 inch w.g.
  • Page 94 Superflow 2K Performance The Superflow 2K filters offer HEPA efficiency at an ultra low pressure drop for HVAC systems supplying air to critical areas. Figure 1 illustrates the Superflow 2K pressure drop as a function of air flow rate for gasket seal and gel seal designs.

  • Page 95: Alpha

    General Alpha Panel Minipleat HEPA/ULPA filters are avail- able in two particle size efficiencies: 99.99% on 0.3 µm and 99.99% on 0.12 µm. They are offered in a complete range of standard sizes to meet the needs of critical applications where HEPA/ULPA filtration is required.
  • Page 96 Performance Data - Capacities and Dimensions Actual Particle Dimensions Model Number (inch) Size Efficiency AP493-2424* 99.99% on AP493-2448* 0.30 Fm Clean Filter Resistance (inch AP591-2424* 99.99% on AP591-2448* 0.12 Fm Clean Filter Resistance (inch *Insert gasket designator: D, U, B or N. See Note 5. Drawing Notes: 1.

  • Page 97: Pureflo

    General Flanders Pureflo Terminal HEPA/ULPA Filter Modules are lightweight low profile ducted units. The mini-pleat filter packs are designed to provide unidirectional airflow from tee-bar ceilings. Pureflo modules are available in two sizes: nominal 24” x 24” and 24” x 48” with either 10” or 12” diameter inlet collars.
  • Page 98 Particle Model Number Size Efficiency PF†-493-2424-* 99.99 on PF†-493-2448-* 0.30 µm Clean Filter Filter Resistance(inchw.g) PF†-591-2424-* 99.9995 on PF†-591-2448-* 0.12 µm Clean Filter Resistance(“w.g) † Insert filter pack depth in mm: 53, 70, or 100 Physical Data Notes: 1. *Insert suffix 10 (nominal 10”collar) or 12 (nominal 12” collar). Add “G”...

  • Page 99: Pureflo-Fpm

    General Pureflo-FPM Fan-Powered Terminal HEPA/ULPA Filter Modules are lightweight unitized low profile units consisting of a fan/motor assembly and a minipleat HEPA/ULPA filter pack, designed to pro- vide unidirectional vertical airflow from tee-bar ceil- ings. The modules are available in two sizes: nom- inal 24”...
  • Page 100 Room Side Standard Replaceable Replaceable Module Module Model Number Model Number PF-FPM-493-2424-RSR PF-FPM-493-2424-STD PF-FPM-493-2448-RSR PF-FPM-493-2448-STD 0.3 PF-FPM-591-2424-RSR PF-FPM-591-2424-STD 99.9995 PF-FPM-591-2448-RSR PF-FPM-591-2448-STD 0.12 Performance Data Notes: 1.Nominal air quantity based on 90 fpm velocity and the module’s gross face area. 2.All fan motors are 1/3 hp single phase; 1570 rpm at 115, 230 and 227V 60Hz, and 1310 rpm at 230V 50Hz.

  • Page 101: Fcp Carbon Pleat

    FCP Series – Activated Carbon Filled Nonwoven Media Adsorbers The Flanders FCP Series adsorbers are designed for removal of malodorous compounds at low con- centration levels. Utilizing the latest technology in fine mesh activated carbon, the product provides high removal efficiency of nuisance odors. Product Design FCP Series filters are pleated activated carbon filled nonwoven media sealed within a moisture...
  • Page 102 Model Number Nominal Size (inches) FCP201-24242 24 x 24 x 2 FCP201-12242 12 x 24 x 2 FCP301-24242 24 x 24 x 2 FCP301-12242 12 x 24 x 2 FCP201-24244 24 x 24 x 4 FCP201-12244 12 x 24 x 4 FCP301-24244 24 x 24 x 4 FCP301-12244...

  • Page 103: Ph Odor Control

    Improves IAQ through odor abatement and better particulate air filtration Many strong odors in living spaces come from materials that are either strong acids or strong bases. For example, sauerkraut smells up the house because it is highly acidic. And the “ammo- nia”...

  • Page 104: Media Specification

    Sensory testing Body Odor Odor level testing was conducted in jars set up spe- cially for headspace odor testing. Sensory evalua- tion was run 20 hours after the jars had been set up to allow for ade- quate equilibration. panelists participated in headspace odor level testing.

  • Page 105: Model C

    General The Model C Disposable Carbon air filter is an easy-to-install partial-bypass carbon type air purifi- er for light duty IAQ applications in home and com- mercial recirculated air systems. The filter uses premium grade granular virgin coconut shell carbon to remove odors by the adsorption process rather than masking them with air fresheners.

  • Page 106: Installation

    Standard Size Capacities and Dimensions Actual Actual Nominal cfm Depth at 300 fpm (inch) (inch) 11-1/2 x 23-1/2 15-1/2 x 19-1/2 15-1/2 x 24-1/2 19-1/2 x 19-1/2 19-1/2 x 24-1/2 1040 23-1/2 x 23-1/2 1200 11-1/2 x 23-1/2 15-1/2 x 19-1/2 15-1/2 x 24-1/2 1-3/4 19-1/2 x 19-1/2...
  • Page 107 General Flanders Superflow-VC Disposable Activated Carbon Adsorbers are designed for gaseous con- tamination control in both new and existing HVAC systems. Superflow-VC Adsorbers have total- detention capability with all air passing through the carbon beds. These adsorbers can help mitigate Indoor Air Quality problems in buildings where the air must be cleansed of gaseous contaminants.

  • Page 108: Application Considerations

    Application Considerations Superflow-VC Adsorbers in HVAC airstreams can remove many gaseous contaminants thus mitigat- ing their effects on people and processes. They are especially useful in controlling common contami- nants that cause poor indoor air quality (IAQ) in commercial and industrial buildings such as office buildings and hospitals.Typical applications and controlled contaminants are: Airports...
  • Page 109 Adsorber Protection Particulate contamination must be considered when utilizing gas/vapor phase adsorbers. As a minimum, a Flanders prefilter with an efficiency of 25-30% per ASHRAE Std. 52.1 should be installed on the upstream side of the Superflow-VC adsorber in order to extend the service life by significantly reducing dirt build-up.
  • Page 110 S u p e r f l o w - V C P e r f o r m a n c e D a t a Adsorber Nominal Size Model Number H x W x D (See Note 1) inch (See Note 2) SFVC-242412...

  • Page 111: Technical Description

    Vaporclean The Flanders Vaporclean vapor phase adsorbers are designed for removal of molecular contami- nants at low concentration levels while utilizing the proven technology of dry processed carbon com- posite media, (DPCC). The adsorbers provide high efficiency removal of multiple contaminants for applications within museums, archive storage facil- ities, airports and semiconductor fabrication facili- ties.
  • Page 112 Vaporclean Performance The pressure drop of the Vaporclean is 0.35 inch w.g. at a face velocity of 500 fpm. The initial efficiency of the adsorber under the following conditions shall be met. Contaminant Toluene Formaldehyde Contaminant Matching Match the Vaporclean media type to the contaminant of concern.
  • Page 113 General HMZD carbon panels are available from 3/8” to 3” depths, and are easily installed in any existing side or front access housing without the usual clean up caused by carbon dusting. Bonded panels do not need to be refilled, thus eliminating the labor asso- ciated with transporting trays.

  • Page 114: Pressure Drop

    Pressure Drop HMZD Panels can be incorporated into V shaped configurations with minimal pressure drop and impact on the system. Please note that the breakthrough test was based on continuous 100 ppm Hexane chal- lenge concentration. Testing conducted at an independent lab on virgin coconut shell car- bon.

  • Page 115: Superior Performance

    Clean Air is Only a Block Away Flanders, through innovative technology, has resolved the problems associated with loose filled activated carbon trays by introducing HMZD bond- ed carbon panels. HMZD stands for High Mass and Zero Dust. High Mass refers to the greater density of activated car- bon installed in each panel, and Zero Dust means the filters will not release carbon dust into the air stream.
  • Page 116 1.0 General 1.1 Molecular contamination control filters shall be Flanders High Mass and Zero Dust (HMZD) bond- ed carbonpanels. Panels shall be self-supported bonded granular carbon and be sized to fit into the selected Flanders Pureseal front or side access housing as well as competitive carbon systems.
  • Page 117 General Applications Techsorb chemical media is specifically formulated to control application specific nuisance and harmful vapors. It is supplied in bulk form and may be incorporated into Flanders gas phase media trays. Considering the wide range of applications and that contaminants are rarely singular in nature, Flanders will provide application assistance that may be required.
  • Page 118 TECHSORB TS-204 has been used extensively in applications ranging from Odor Control to Process Protection. The primary applications are for odor control associated with ammonia and low molecular weight amines typical of animal confined space areas, decaying fish, sugar beet processing, ammonia cleaning solutions and blue printing.

  • Page 119: Type 9

    General Flanders Type 9 Holding Frames are used to con- struct built-up filter banks for upstream or down- stream access using ASHRAE rated filters. Type 9 frames will accommodate 1”, 2” or 4” panel filters including metal washable filters. They are also suit- able for bag filters, self-supporting rigid filters and disposable type carbon elements.
  • Page 120 Model Length Number (inch) Filter Usage 1” panel filter, Precision Pak, PrecisionCell, or Rigid-Air 2” panel filter 2” panel prefilter with Precision Pak, PrecisionCell, or Rigid-Air 4” panel filter, PrecisionCell II 4” panel prefilter with Precision Pak bag,PrecisionCell, or Rigid-Air 6”...

  • Page 121: Installation

    General Uni-Frames are designed for retaining air filter media pads in applications that require additional media support. The frame is fabricated of 26 gauge corrosion- resistant steel channel with each corner of the frame mitered for squareness. Filter pads are sup- ported on the downstream side with a corrosion- resistant steel expanded metal lathe grid.

  • Page 122: K-Trac

    General K-Trac Filter Framing Modules are used for ASHRAE rated filters 2” to 36” in depth. K-Trac Modules are complete factory-designed units which replace multiple field-erected holding frames. They also provide inherent structural strength and leak- proof assembly that is sometimes lacking in frame- type installations.
  • Page 123 Height Overall Face Code Height Velocity (in) (fpm) 36-1/26 24-1/2 2250 3000 3750 36-15/16 3000 4000 5000 48-13/16 4500 6000 7500 61-1/4 5250 7000 8750 73-1/8 6750 9000 11250 85-9/16 7500 10000 12500 97-7/16 9000 12000 15000 109-7/8 9750 13000 16250 121-3/4 11250...
  • Page 124 Quick and easy assem- Assembled module bly with a ratchet wrench Filters with poly- foam side gasket Filters Height Weight Code (lbs.) Filters 1A-1C Weight Filters 1A-2C 2A-2C Weight Filters 2A-2C Weight Filters 2A-3C 4A-2C Weight Filters 3A-3C Weight Filters 3A-4C 6A-2C Weight...
  • Page 125 Drawing Notes 1. Framing members of extruded aluminum are factory-cut to exact length, pre-drilled and gasketed. 2. One vertical support for the center of the upstream side will be furnished on modules nominal 8 ft. wide. Wider mod- ules will be furnished with vertical supports on both the upstream and downstream sides. 3.

  • Page 126: Perma Frame

    General Flanders Perma Frame is used to mount ducted or fan-powered terminal modules in a hard ceiling application such as sheet rock or plasterboard. The Perma Frame is ideal for biotech facilities that require frequent wash-down of the cleanroom as well as isolation hospital rooms where HEPA type filtration is frequently required.

  • Page 127: Construction Details

    1.0 General 1.1 Sheet rock adaptor frame for ceiling mounted ter- minal modules shall be Perma Frame as manu- factured by Flanders. 2.0 Frame Construction 2.1 Frames shall be constructed of 18 gauge steel and welded flush on all exposed corners. Corporate Headquarters, St.

  • Page 128: Residential/Light Commercial Air Cleaners And Filters: Air Cleaner Refills Space Gard , Air Bear And Honeywell Air Cleaners

    Research Products Corporation. Reference to their mark is for system identification only. ® *Honeywell is a registered trademark of Honeywell Inc. Reference to their mark is for system identification only. Corporate Headquarters, St. Petersburg, FL Residential Air Cleaner For Space Gard ®...
  • Page 129 *Space Gard® is a registered trademark of Research Products Corporation. Reference to their mark is for system identification only. *Honeywell® is a registered trademark of Honeywell Inc. Reference to their mark is for system identification only. Performance values stated may be averages typical of the products listed. Contact factory for actual performance test reports on specific products.

  • Page 130: Model 500Ab

    Corporate Headquarters, St. Petersburg, FL Construction The Model 500AB air cleaner housing has a built-in prefilter track. Using a prefilter can greatly increase the useful life of a high efficiency filter such as the 500AB or 550AB cartridges. The Model 500AB air cleaner housing takes a standard 20 x 25 x 1 dis- posable panel filter as a prefilter.
  • Page 131 Versatile Installation The Model 500AB air cleaner housing can be installed in a variety of configurations; Highboy, Lowboy, Horizontal, Upflow or Vertical Downflow. HIGHBOY UPFLOW TYPICAL TRANSITION (VERTICAL DOWNFLOW) Flanders - Foremost in Air Filtration Corporate Headquarters, St. Petersburg, FL...

  • Page 132: Physical Data

    Physical Data Rated capacity 350 CFM Electrical input Power Consumption Weight Controls Cabinet Flanders - Foremost in Air Filtration Airia 350 Electronic Room Air Cleaner 120 VAC, 1Ph, 60 Hz 100 watts 55 lbs. On-off-variable speed, solid state Wood, vinyl laminated...

  • Page 133: Aria 1000 And 2000 In-Duct Electrostatic Air Cleaners

    General The Airia line of electronic air cleaners delivers high, instantaneous filtering efficiency in a reliable, permanent package that is built to last the life of an air handling system. Airflow resistance is low and constant. Operation costs only pennies per day. Airia 1000 and 2000 are designed for easy duct- mounted installation with today’s higher efficiency central forced air systems.

  • Page 134: Specifications

    Model DIM “A” (inches) AIRIA 1400 19.960 AIRIA 2000 23.960 Power Pack Cabinet DIM “C” DIM “D” 1” Specifications Rated Capacity Electrical Input Power Consumption Resistance to Airflow Unit Weight Prefilter Main Collector Odor Control Finish Mounting Options On/Off Operation DIM “B”...

This manual is also suitable for:

10255 series10355 series10155 series10055 series11655 seriesSt55 series ... Show all

Table of Contents