Sharp 27U-F500 Service Manual page 5

LOCATION OF USER'S CONTROL
Front Panel
POWER
Press On.
Press again Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press Accesses MAIN MENU.
Press again
Basic Remote Control Functions
POWER
Press On.
Press again Off.
ANT–A/B
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs
by using the 4 categories A, B, C and D
The channels can be accessed quickly
by using these buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects the
TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
MUTE
Press Mutes sound.
Press again Restores sound.
• CLOSED CAPTION appears when
sound is muted.
POWER
Press On.
Press again Off.
DVD/VCR CONTROL
PIP FUNCTION
You can watch two pictures at the same
time.
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
(27U-F810)
POWER MENU – VOL + CH
POWER MENU – VOL +
VOLUME UP/DOWN
(+) Increases sound.
Exits MAIN MENU.
(–) Decreases sound.
POWER CATV
DVD VCR
ANT–A/B DISPLAY INPUT
1 2
4 5
7 8
FLASHBACK ENTER
0 100
PERSONAL PREFERENCE
A B C
CH
'
VOL VOL
\ |
–
"
CH
À SKIP à
MENU MUTE
"VCR-CH '
POWER (DVD/VCR)
PLAY
|
REW FWD
Ë
STOP
È è
PAUSE
Ë
PIP SELECT
SWAP FREEZE MOVE
CH SKIP
TV • CATV • VCR • DVD
5
VIDEO/AUDIO
TERMINALS
PULL-OPEN
AV-2 IN
VIDEO L-AUDIO-R
(MONO)
CH
CHANNEL UP/DOWN
'
( ) Selects next higher
channel.
( ) Selects next lower
"
channel.
• Press both at the same
time to access the MAIN
MENU screen.
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR, sends power and channel
select commands (Channel up/down and
TV
Random Access buttons) to the TV and
VCR control.
Press CATV/DVD, sends power and
channel select commands to a cable TV
converter and DVD control.
3
DISPLAY
6
Press Displays receiving channel for
9
four seconds.
Press again Removes display.
• Temporarily displays receiving channel
when in Closed Caption mode.
D
INPUT
+
Press Switch to external video INPUT
1 mode.
Press 2 times Switch to external video
INPUT 2 mode.
Press 3 times Switch to external video
REC
INPUT 3 mode or COMPONENT mode.
Press 4 times
original TV mode.
ENTER
Used in some instances where a Cable
Converter Box requires an "enter"
command after selecting channels, when
using the REMOTE KEYPAD button.
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
( ) Selects next lower channel. "
• Moves the " " marks of the MENU
screen
SKIP/VCR-CH
REC
27U-F500
27U-F810
IN 2
Switch back to the