Location Of User's Control - Sharp 27U-F500 Service Manual

27U-F500
27U-F810
Front Panel
POWER
Press On.
Press again Off.
SENSOR AREA FOR
REMOTE CONTROL
Basic Remote Control Functions
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.

LOCATION OF USER'S CONTROL

(27U-F500)
POWER
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
POWER
TV
FLASHBACK
A
VOL
—
MENU
REW
PAUSE
POWER MENU – VOL + CH
PULL-OPEN
MENU – VOL + CH
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
Infrared Transmitter Window
DISPLAY
Press
four seconds.
DVD
VCR DISPLAY INPUT
Press again
• Temporarily displays receiving
1 2 3
4 5 6
INPUT
Press
7 8 9
INPUT 1 mode.
ENTER
Press 2 times
0 100
INPUT 2 mode.
PERSONAL PREFERENCE
Press 3 times
B C D
INPUT 3 mode or COMPONENT mode.
CH Press 4 times
VOL
original TV mode.
+
CH
MUTE
ENTER
CATV TV
Used in some instances where a Cable
Converter Box requires an "enter"
DVD VCR
command after selecting channels,
when using the REMOTE KEYPAD
PLAY FF
button.
CH/SKIP
STOP REC
CHANNEL UP/DOWN
'
( ) Selects next higher channel.
"
( ) Selects next lower channel.
• Moves the "
TV • CATV • VCR • DVD
MUTE
Press
Press again
• CLOSED CAPTION appears when
4
VIDEO/AUDIO IN 2
TERMINALS
(INSIDE DOOR)
CHANNEL UP/DOWN
( ' ) Selects next higher
channel.
( " ) Selects next lower
channel.
• Press both at the same
time to access the MAIN
MENU screen.
Displays receiving channel for
Removes display.
channel when in Closed Caption
mode.
Switch to external video
Switch to external video
Switch to external video
Switch back to the
" mark of the MENU
screens.
Mutes sound.
Restores sound.
sound is muted.