Sanyo CE28CN8F-C Service Manual page 7

CORNER ADJUSTMENT
1. Receive cross hatch pattern and set screen mode to
"FULL".
2. Enter the service mode and select item no. 25. UC
PARABOLA for top corner adjustment OR item no.
26. LC PARABOLA for bottom corner adjustment.
3. Press the LEVEL+ or LEVEL - button to correct the
distortion of the vertical line around the corners.
HORIZONTAL ADJUSTMENT
HORIZONTAL CENTRING ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter the service mode and select item no. 22. HOR.
SHIFT.
3. Press the LEVEL+ or LEVEL - button to adjust the
horizontal centre.
HORIZONTAL WIDTH ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter to the service mode and select item 21. EW
WIDTH.
3. Press the LEVEL+ or LEVEL - button to adjust the
horizontal width.
HIGH-VOLTAGE CONFIRMATION
1. Receive circular pattern and set screen mode to
"FULL".
2. Set controls for brightness and contrast to maximum.
3. Connect high-voltage meter to the anode of CRT and
GND.
4. Confirm that voltage is 26 kV ±1.0kV at maximum
beam current 1.2mA ± 0.05
VERTICAL ADJUSTMENT
VERTICAL CENTRING ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter the service mode and select item no.16.VERT
SHIFT.
.3 Press the LEVEL+ or LEVEL - button to adjust the
vertical centre.
VERTICAL HEIGHT ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter the service mode and select item no. 17. VERT
AMPL.
3. Press the LEVEL+ or LEVEL - button to adjust the
vertical height.
OSD POSITIONING ADJUSTMENT
1. Receive circular pattern and set screen mode to
"FULL".
2. Enter the service mode and select item no. 314. TXT -
H - POS.
3. Press the LEVEL+ or LEVEL - button to adjust
proper OSD positioning.
314
-9-
TXT - H - POS 7
C5WYS