Table of Contents
Advertisement
Windows NT 4.0
Make sure that the Network Services already
1.
installed in the NT 4.0 system.
Insert the Ethernet Adapter into one of the
2.
system's PCMCIA Slots
Power up Windows NT 4.0
3.
Open My Computer
4.
Open Control Panel
5.
Run the Network
6.
Select Adapters page
7.
Press Add to add network adapter
8.
Press Have Disk button
9.
Insert the driver disk into drive A:
10.
Specify the path to " A:\ and press OK
11.
A dialog box will appear to adjust the
12.
driver's settings. The resources assignment to
the adapter must be unique in the system.
Press OK when all settings are completed.
13.
Press Close to complete network setting.
- 7 -
Advertisement
Table of Contents
