Sony DVP-NC625 Service Manual page 26

Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
N
Choose settings according to the TV to be
The screen saver image appears when you
connected.
leave the player in pause or stop mode for 15
minutes, or when you play back a CD or
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the DATA CD (MP3 audio) for more than 15
minutes. The screen saver will help prevent
Setup Display" on page 63.
your display device from becoming damaged
The default settings are underlined.
(ghosting). Press H to turn off the screen
saver.
SCREEN SETUP
TV TYPE: 4:3 LETTER BOX
SCREEN SAVER: ON
ON
BACKGROUND: JACKET PICTURE
ON
BLACK LEVEL:
OFF
BLACK LEVEL : ON
(COMPONENT OUT)
N
Selects the background color or picture on the
TV screen in stop mode or while playing a
N
CD or DATA CD (MP3 audio).
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
JACKET
PICTURE
4:3 LETTER Select this when you connect a
BOX 4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the
screen.
4:3 PAN Select this when you connect a
GRAPHICS A preset picture stored in the
SCAN 4:3 screen TV. Automatically
displays the wide picture on the
BLUE
entire screen and cuts off the
portions that do not fit.
BLACK
16:9 Select this when you connect a
wide-screen TV or a TV with a
N
wide mode function.
Selects the black level (setup level) for the
video signals output from the jacks other than
COMPONENT VIDEO OUT.
4:3 LETTER BOX
ON
OFF
4:3 PAN SCAN
16:9
N
Selects the picture in pause mode.
AUTO The picture, including subjects
that move dynamically, is
"AUDIO SETUP" allows you to set the sound
output with no jitter. Normally
select this position. according to the playback and connection
conditions.
FRAME
The picture, including subjects
that do not move dynamically,
Select "AUDIO SETUP" in the Setup
is output in high resolution.
Display. To use the display, see "Using the
Setup Display" (page 63).
N
The default settings are underlined.
Gives the sound track which contains the
highest number of channels priority when you
play a DVD VIDEO on which multiple audio
formats (PCM, DTS, or Dolby Digital
format) are recorded.
OFF No priority given.
AUTO Priority given.
N
Notes
If the playback sound is distorted, set this
• When you set the item to "AUTO," the language item to "ON." The player reduces the audio
may change. The "TRACK SELECTION" setting
output level.
has higher priority than the "AUDIO" settings in
This function affects the output of the LINE
"LANGUAGE SETUP" (page 64).
OUT L/R (AUDIO) jack.
• If you set "DTS" to "OFF" (page 68), the DTS
sound track is not played even if you set "TRACK
OFF
SELECTION" to "AUTO."
• If PCM, DTS, and Dolby Digital sound tracks
ON
have the same number of channels, the player
selects PCM, DTS, and Dolby Digital sound
tracks in this order.
N
N
Makes the sound clear when the volume is
Switches the Multi-disc Resume setting on or
turned down when playing a DVD that
off. Resume playback point can be stored in
memory for up to 6 different DVD VIDEO/ conforms to "AUDIO DRC." This affects the
output from the following jacks:
VIDEO CD discs (page 30).
– LINE OUT L/R (AUDIO) jack
ON Stores the resume settings in
– DIGITAL OUT (COAXIAL or OPTICAL)
memory for up to six discs (The
jack only when "DOLBY DIGITAL" is set
settings remain in memory even
to "D-PCM" (page 68).
if you select "OFF.")
STANDARD Normally select this position.
OFF Does not store the resume
settings in memory. Playback
TV MODE
restarts at the resume point only
for the current disc in the player.
WIDE
RANGE
Note
Turns on the screen saver.
Turns off the screen saver.
The jacket picture (still picture)
appears, but only when the
jacket picture is already
recorded on the disc (CD-
EXTRA, etc.). If the disc does
not contain a jacket picture, the
"GRAPHICS" picture appears.
player appears.
The background color is blue.
The background color is black.
Sets the black level of the output
signal to the standard level.
Lowers the standard black level.
Use this when the picture
becomes too white.
c continued
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: OFF
Normally, select this position.
Select this when the playback sound
from the speakers is distorted.
Makes the low sounds clear
even if you turn the volume
down.
Gives you the feeling of being
at a live performance.
c continued
N
Selects the black level (setup level) for the
video signals output from the COMPONENT
VIDEO OUT jacks.
You cannot select this when the player
outputs progressive signal and the
PROGRESSIVE indicator lights up in blue
on the front panel.
ON Sets the black level of the output
signal to the standard level.
OFF Lowers the standard black level.
Use this when the picture
becomes too white.
N
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Displaying the
audio information of the disc" (page 50). This
function affects the output of the following
jacks:
– LINE OUT L/R (AUDIO) jack
– DIGITAL OUT (COAXIAL or OPTICAL)
jack when "DOLBY DIGITAL" is set to
"D-PCM" (page 68).
DOLBY Normally, select this position.
SUR- Multi-channel audio signals are
ROUND
output to two channels for
enjoying surround sounds.
NORMAL Multi-channel audio signals are
downmixed to two channels for
use with your stereo.
N
Selects if audio signals are output via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack.
ON Normally select this position. When
you select "ON," see "Setting the
digital output signal" for further
settings.
OFF The influence of the digital circuit
upon the analog circuit is minimal.
1-16
Use this to set up playback related and other
settings.
Select "CUSTOM SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 63).
The default settings are underlined.
CUSTOM SETUP
AUTO POWER OFF: OFF
AUTO PLAY: OFF
DIMMER: BRIGHT
AUTO
PAUSE MODE:
TRACK SELECTION: OFF
MULTI-DISC RESUME: ON
N
Switches the Auto Power Off setting on or
off.
OFF Switches this function off.
ON The player enters standby mode
when left in stop mode for more
than 30 minutes.
N
Switches the Auto Play setting on or off. This
function is useful when the player is
connected to a timer (not supplied).
OFF Switches this function off.
ON
Automatically starts playback
when the player is turned on.
N
Adjusts the lighting of the front panel display.
BRIGHT Makes the lighting bright.
DARK
Makes the lighting dark.
Switches the method of outputting audio
signals when you connect a component such
as an amplifier (receiver) or MD deck with a
digital input jack.
For connection details, see page 19.
Select "DOLBY DIGITAL" and "DTS" after
setting "DIGITAL OUT" to "ON."
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
ON
DOLBY DIGITAL: D-PCM
DTS: OFF
If you connect a component that does not
conform to the selected audio signal, a loud
noise (or no sound) will come out from the
speakers, damaging your ears or speakers.
N
Selects the type of Dolby Digital signal.
D-PCM Select this when the player is
connected to an audio
component lacking a built-in
Dolby Digital decoder. You can
select whether the signals
conform to Dolby Surround
(Pro Logic) or not by making
adjustments to the
"DOWNMIX" item in
"AUDIO SETUP" (page 68).
DOLBY Select this when the player is
DIGITAL connected to an audio
component with a built-in
Dolby Digital decoder.
N
Selects whether or not to output DTS signal.
OFF Select this when the player is
connected to an audio
component lacking a built-in
DTS decoder.
ON
Select this when the player is
connected to an audio
component with a built-in DTS
decoder.