Advertisement
UPS Input cord length (m)
Recommended Electrical Service
Phase
BATTERY
Full load runtime (minutes)
Half load runtime (minutes)
Expandable battery runtime
External battery pack compatibility
DC system voltage (VDC)
Battery recharge rate (included
batteries)
Replacement battery cartridge
(internal UPS battery replacement)
Battery Access
Battery replacement description
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Undervoltage correction
Severe undervoltage correction
LEDS ALARMS & SWITCHES
Front panel LCD display
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
UPS AC suppression response time
EMI / RFI AC noise suppression
PHYSICAL
3
30A 120V
Single-Phase
3.5 min. (2250w)
10 min. (1125w)
Output with external battery pack configurations is limited to 1600 watts maximum
(limit 1);
BP48V24-2U
BP48V60RT-3U
48
Less than 4.5 hours from 10% to 90%
RBC94-2U
Front panel battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Input voltages between 127 and 145 are reduced by 12%
Input voltages between 108 and 96 are boosted by 12%
Input voltages between 83 and 95 are boosted by 24%
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating
data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual
for detailed LCD configuration and monitoring options)
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
570
Instantaneous
Yes
(multi-pack compatible);
BP48V27-2US
3 / 6
(multi-pack compatible)
Advertisement
