Operating Features - Kenwood TK-863G Service Manual

1. Controls and Functions
1-1. Front Panel
1 2 3
6
1-2. Microphone
8
q
(Power) switch
Press to switch the transceiver ON (or OFF).
w LED indicator
Lights red while transmitting.
e
/ keys
Press these keys to activate their programmable auxil-
iary functions (page 4). The default settings are Volume
Up and Volume Down.
r Display
See right for more information.
t
/ keys
Press these keys to activate their programmable auxil-
iary functions (page 4). The default settings are System
Up and System Down.
y Microphone jack
Insert the microphone plug into this connector.
u MON, A, D/A,
, , and SCN keys
Press these keys to activate their programmable auxil-
iary functions (page 4).
i PTT switch
To transmit, press and hold this switch, then speak into
the microphone. Release to receive.

OPERATING FEATURES

4 5
7
1-3. Display
Indicator
Appears when the selected group is
programmed as priority.
Appears when the selected group is
programmed as Talk Around.
Appears when the key programmed
as Monitor is pressed.
If programmed by your dealer,
appears when you receive an ID.
Appears when you are using Scan
mode.
Appears when the auxiliary function
is activated.
In trunked operation, appears when
the selected group is programmed
as telephone IDs.
Appears when the selected system
is removed from the scanning
sequence.
Displays the system and group
numbers. Your dealer can program
system and group names with up to
8 characters, in place of numbers.
1-4. Rear Panel
Power input
connector
External
speaker jack
TK-863G
Description
Antenna
connector
3