Table of Contents
Advertisement
#2
#17
Figure 5
7. Attach the Display Handrail.
A. Locate the display handrail (#4), four screws 5/16-18 x .75" (#14) and four washers 5/16" (#18).
See Figure 6.
B. Using a 1/2" open end wrench secure the display handrail (#4) to the display upright (#2) using
four screws 5/16-18 x .75" (#14) and four washers 5/16" (#18).
8. Attach the Handrails.
A. Locate the two handrails (#5), four screws
5/16-18 x 7/8" (#13), four washers 5/16" (#18)
and four shoulder washers (#20). See
Figure 7.
B. Using a 3/16" allen wrench secure the
handrails (#5) to the display handrail (#4) using
the four screws 5/16-18 x 7/8" (#13), four
washers 5/16" (#18) and four shoulder
washers (#20). See Figure 7.
9. Attach the Display Console to the Display
Handrail.
A. Locate the display console (#6) and four
screws 1/4-20 x 1.25" (#15). See Figure 8.
B. Using a Phillips head screwdriver, remove the
four screws securing the console front to the
console back. See Figure 8.
Cybex 530S Owner's Manual
#3
#17
Figure 6
Figure 7
#14
#18
#4
#14
#5
#20
#18
#2
#18
#4
#13
Setup
and Assembly
Page 5-7
Advertisement
Table of Contents
