Table of Contents
Advertisement
SET UP AND INSTRUCTIONS continued...
8. To use the headphone simply lift it out of the cradle and put
it on your head (under your chin). Then turn the volume up to a
comfortable level and you are ready to watch your favorite
program ( please see
9. Note: please make sure that the under chin headphone is ON
(see
figure 5
If the word VOLUME is upside down, then you have the headphones
on backwards.
10. When you are finished using the under chin headphone simply put
it back into the transmitter base. Make sure that the LED light turns
on in the transmitter base
11.To replace the battery pack simply pull one out of the transmitter
base (right side), pull out the battery pack from the under chin
headphone, plug the new battery pack into the under chin
headphone and then put the drained battery pack back into the
right side of transmitter base for recharging.
Warning:
Do not force the battery pack into the charger or headphone.
It fits easily when in the correct orientation.
12. Note: the transmitter base will automatically take care of the
recharging of the batteries.
13.The transmitter base has a switch that allows you to switch
between stereo and mono operation. For most users leave
the switch set to stereo.
figure 5
). You should be able to read the word VOLUME properly.
).
figure 3
(please see
).
4
Advertisement
Table of Contents
