Audio Connection; Connecting To The Digital Audio Terminal - Kenwood BD-7000 Instruction Manual

Audio Connection

Connecting to the Digital Audio Terminal

• You can connect audio equipment or the TV to the OPTICAL DIGITAL OUT terminal.
• For details on digital audio output formats (PCM/bitstream), refer to the digital audio output format selection
table on page 44.
STEPS
1 Be sure to turn off this Player and the equipment before making any connections.
2 Firmly connect an optical digital cable (commercially available) to the optical digital audio terminals (1 and 2).
• When using OPTICAL DIGITAL OUT,
5.1 ch Digital Output is available.
7.1 ch Digital Output is not available.
NOTE:
7.1 ch Audio is available via the HDMI terminal.
NOTE
• Digital audio cannot be copied from the
OPTICAL DIGITAL OUT terminal.
After connecting
• If necessary, perform the Audio Video Settings. (Page 37)
• Prepare the desired disc or content and start playback. (Pages 24–30)
18
TV
Audio equipment with a digital audio input terminal
This Player
To OPTICAL DIGITAL
OUT terminal
Optical digital cable
(commercially available)
To OPTICAL DIGITAL
AUDIO IN terminal
Amplifier
1
2