Player Setup Location; Removing And Replacing The Terminal Cover - Kenwood BD-7000 Instruction Manual

Player setup location

Removing and replacing the
terminal cover
Before connecting the player to a TV, the AC adapter,
etc., remove the terminal cover on the bottom of the
player.
1
Remove the terminal cover on the bottom of the
player.
b Bottom side of the player
2
Make the necessary connections to the player
(Pages 17–19, 21).
3
Replace the terminal cover.
E Using the player in a horizontal position
Pass the cables through the centre of the
terminal cover.
b Bottom side of the player
Pass the cables through here.
Replace the terminal cover so the cables pass
through the centre of the cover.
b Bottom side of the player
16
Installation example
Securing bracket for the HDMI cable
The terminal cover has a securing bracket to prevent
breakage of the HDMI cable. When the HDMI cable is
not passed straight through the securing bracket, the
terminal cover cannot be closed.
b Back of the terminal cover
Securing bracket for the HDMI cable
Installation precautions
Always install the system on a level, stable surface. When
installing on a stand or tabletop, be sure to confirm the
strength of the stand.
The magnetism from the speakers may cause color
irregularities on a nearby TV or PC screen. Always install the
speakers at a distance from a TV or PC.
¤
CAUTION
Observe the following cautions when installing the system
(Main unit and AC adaptor). Insufficient heat radiation may
build up internal heat and cause a malfunction or fire hazard.
• Do not place an object that may hinder heat radiation on
the system.
• Do not install the system on the back, on the side or
upside down.
• Do not place a cloth on the system or place it on a carpet
or cushion.
• Do not use the system in a poorly ventilated place.
Malfunction of the system
If the system does not function properly or the display shows
erroneous information even when the connections are made
correctly, reset the system (Page 47).