Specifications - Kenwood SW-26HT Instruction Manual

Specifications

Type ...................... Subwoofer system with built-in amplifier
[Amplifier]
Rated Output Power ........... 50 W RMS (100 Hz, 0.1%, 4 )
Input Sensitivity & Input Impedance ........ 100 mV / 43 k
Rated Power Consumption ........................................ 50 W
Notes:
1. Kenwood follows a policy of continuous advancements in development. For this reason, specifications may be changed with-
out notice.
2. Full performance may not be exhibited in extremely cold locations (below 0 deg. C).
8
Caution: Read this page carefully to ensure safe operation.
200 mV / 43 k (MONO)
[Speaker]
Enclosure .......................... Bass-Reflex, Floor Standing Type
Speaker Units ........................... 160 mm (6-1/2 ") Cone type
Nominal Impedance ....................................................... 4
Dimensions
Width ............................................... : 290 mm (11-7/16 ")
Height ............................................. : 300 mm (11-13/16 ")
Depth ............................................... : 420 mm (16-9/16 ")
Net Weight ...................................................... 10 kg (22.0 lb)
Supplied accessories
Pin-plug cord .................................................................. 1
Cushion .......................................................................... 4
NOTE: DO NOT REMOVE THE GRILLE.