I
AC applications
1. Start the engine and make sure the pilot
lamp comes on. If not, the fila-
ment may be burnt out.
2. Turn the voltage selector switch to either position
as required.
NOTE:
With the voltage selector switch in the "12OV/24OV"
position,
y.ou
can use the 120V and 240V receptacles simultaneously.
If you are not using
:
the 240V receptacle,
but you require more power from the 120V twrst-lock
receptacle, then turn the switch to the "12OV"
position.
PILOT
VOLTAGE
SELECTOR
LtMP
SWITCH
3. Switch on the AC Circuit
Breaker.
AC CIRCUIT
BREAKER
21