Safety Precautions _______________ To get the best performance from your Jasmine KT88-PP Tube Integrated Amplifier, and for your own safety, please read and follow these important safety instructions: Never place the Jasmine KT88-PP Tube Integrated Amplifier near heat sources such as radiators, fireplaces, stoves, or other appliances that produce heat.
A Brief of Jasmine The Design Philosophy of jasmine Installation Unpacking The Accessory Kit Installing Tubes Choosing a Location for the Jasmine Amplifier Connections Connecting to AC Power Connecting to the Signal Source Connecting to the Speakers Operation Before Power on the Amplifier...
Introduction _______________________ All of us at Jasmine would like to offer thanks and congratulations to you for purchasing the Jasmine KT88-PP Tube Integrated Amplifier. We sincerely believe that your Jasmine KT88-PP Tube Integrated Amplifier is an intelligent purchase decision that will bring you many years of musical pleasure and satisfaction.
Installation _______________________ This section includes information on how to unpack and position your Jasmine KT88-PP Tube Integrated Amplifier. Unpacking After carefully unpacking your Jasmine KT88-PP Tube Integrated Amplifier, inspect for any shipping damage and call your dealer immediately if any is found. Do not plug your Jasmine KT88-PP Tube Integrated Amplifier into any outlet if you find shipping damage.
Choosing a Location for the Jasmine Amplifier The sound quality of all high-performance digital and analog components can be degraded by vibration. Although the Jasmine KT88-PP Tube Amplifier uses some of the most advanced noise-reduction circuitry available, it too will benefit from any efforts taken to reduce vibration.
Connections _______________________ This section provides instructions to connect the Jasmine KT88-PP Tube Amplifier to the rest of your music system. Below is an illustration of the Jasmine KT88-PP Tube Amplifier rear panel, showing all inputs and outputs. Right SP Voltage Mode...
Connecting to the Signal Sources You can directly connect your CD player, Tuner to the Jasmine KT88-PP Tube Amplifier. But Turntable, You have to connect your turntable to the Jasmine KT88-PP Tube Amplifier by a phono stage , except your turntable embedded phono stage inside.
Operation _______________________ This section describes how to operate the Jasmine KT88-PP Tube Amplifier. Before Power On the Amplifier To make sure the volume switch is turned to the minimum position before you turn on the power switch ! Please power on your signal source devices before turn on your Jasmine KT88-PP Tube Amplifier.
The lifetime of vacuum tube depend on the quality and used hours each day. Usually, one set of tubes can be used for 3 ~ 5 years. After you used Jasmine KT88-PP for several years and find the sound quality degraded markedly.
Step Two: Power on the amplifier 1. Before power on the Jasmine KT88-PP, be sure the speaker cables are connected! 2. Carefully turn on the power switch, waiting for 5 minutes till the tubes warmed up. Using a multi-meter, setting to direct voltage 20V...
0.45V Repeating the steps above for each power tube. Please keep in mind for that the bias voltage of each tube is best at same level. Congratulation! You just updated your Jasmine Piano KT88-PP Tube Amplifier!
90 day warranty on parts and labor. 7. The customer is responsible for shipping the unit to Jasmine. 8. Jasmine product is only warranted in the country of original sale.
110 ~120V / 50~60Hz or 220 ~ 240V/ Voltage Model: 50~60Hz Net Weight: 23Kg Size: 430(W) x 410(D) x 200(H) mm Power Consumption: 200W (static status) @ 2006 Jasmine audio Block B1-5C, Digital Tech. Park, Southern Keji Rd., Shenzhen, GD, China 518057 Subject to change without notice.
Need help?
Do you have a question about the Concerto KT88-PP and is the answer not in the manual?
Questions and answers