Operating Instructions - MobileBlackBox Eclipse-4000 User Manual

1. Connect supplied antenna to the antenna socket
without antenna connected, damage may occur to the transmitter unit.)
2. Connect power source to DC power input jack
cord/adapter. Power-Ready RED light
and ready.
3. Connect audio source using supplied 3.5mm audio cable. Connect one end to Audio
input jack . Connect the other end of the cable to audio output jack (or headphone
jack) of the source device ie. MP3 player, iPod, PC, MAC, PDA, DVD player*, Satellite
receiver*, TV*, etc.
*Optional RCA/3.5mm convertor cable may be needed to connect to these devices.
4. Optional – transmitting from a microphone: You may transmit audio from a
microphone by connecting a stereo plug-type microphone to the microphone input jack
.
(DO NOT USE A MONO PLUG-TYPE MICROPHONE, DOING SO WILL CAUSE PERMANENT
DAMAGE TO YOUR Eclipse-4000 transmitter UNIT) see illustration below....
. (DO NOT operate transmitter
, using the supplied DC power
will light-up to indicate that power is connected