Monster Power HTS2500MKII Owner's Manual page 28

Possible Cause #3
The PowerCenter's power cord is plugged into an outlet on the back of one of your components and the component
is not turned on.
Possible Solution
• Turn on the component.
NOTE: For the best possible performance, plug the PowerCenter into a wall outlet, not an
outlet on another component.
Possible Cause #4
The PowerCenter is defective.
Possible Solution
• Please see page 31 for warranty information.
PROBLEM – PowerCenter is not providing power to the components.
Possible Cause #1
The component is plugged into a switched or timed outlet and the PowerCenter has not been turned on.
Possible Solutions
• Press ON/OFF button to turn on the PowerCenter. The components plugged into the
PowerCenter"s switched outlets should be turned on immediately.
• Press the ON/OFF button to turn on the PowerCenter and wait for a few seconds for the
components plugged into the PowerCenter"s timed outlets to be turned on.
• Or, plug the component into any of the PowerCenter"s unswitched outlets.
TROUBLESHOOTING (continued)
22