Monster Power HTS2500MKII Owner's Manual page 18

STEP 6 Remote DC Control Hookups
NOTE:
This feature allows you to turn on/off your PowerCenter via your Home Automated Control System. A component you
don't want powered constantly (such as your projector or surround amplifier) can be plugged into one of the
PowerCenter's switched or timed outlets and be remotely activated when needed. This feature also allows you to use
a low voltage cable (not supplied) to remotely control multiple PowerCenters.
You can't turn off the PowerCenter using the front panel ON/OFF button when there is any external signal feeding
either the AC or DC input jacks on the PowerCenter.
A) Plug a 1/8" mini-plug cable (not supplied) into the corresponding outlet on the PowerCenter (see diagram below).
B) Press the ON/OFF button to turn off the PowerCenter.
C) Plug the other end of the cable into the corresponding outlet on your component that has an output in the range
of 3 ~ 30V DC. When you turn on the component, the PowerCenter's switched outlets will be turned on
immediately. However, the PowerCenter's timed outlets will be turned on after a delay of approximately 6 seconds.
UNSWITCHED
GROUND
Designed in U.S.A.
Manufactured
in Taiwan
UNSWITCHED UNSWITCHED SWITCHED
CABLE TV
IN OUT
REMOTE
AC IN
110V
IN SATELLITE OUT
0.3A
TIMED
ANTENNA
IN OUT
DC IN 3~30V
IN OUT 1
PHONE
OUT 2
BREAKER 15A 1800W
PRESS TO RESET MAX TOTAL
12