Table of Contents
Advertisement
5. Deflection amplitude setting (HIT/WID adjusting method under muted convergence)
B
A
2nd flag 1st flag
Horizontal amplitude: Left and right register marks of Philips pattern C + D = 8 (See A of the upper figure.)
Vertical amplitude:
The point where the 3rd vertical line outer from the upper and lower register marks of Philips
pattern is overlapped with flags contacts the screen edge. If the amplitude is uneven horizontally
and vertically, make HIT adjustment so that B shown in the upper left of the upper figure comes to
contact the screen edge.
Next, pay attention to the C point. Check and confirm that the castration border line contacts
through 2nd line to 4th line outer from the lower register mark.
0 point
Castration border line
C
* Green pattern under the muted convergence
Screen edge
- 24 -
A
Hide quick links:
Advertisement
Table of Contents
