Table of Contents
Advertisement
Important information
Multi-function display software version
The Digital Radome scanner can be connected directly to a C-Series or
E-Series display, or to a C-Series, E-Series or G-Series display via a
hs
SeaTalk
switch.
The Digital Radome scanner is compatible with the following multi-func-
tion displays:
•
C90W, C120W, and C140W C-Series displays.
•
E80, E120 E-Series displays.
•
G120, G150, G170, and G190 G-Series displays.
For operation of your scanner, the multi-function display unit requires the
latest software version.
After installing your scanner, download the latest software for your multi-
function display from the Raymarine website (www.raymarine.com).
To find out whether your display is using the latest software version, switch
on the display and check the version number on the navigation warning
screen. However, if a scanner is not connected to the multi-function
display, the version number will only be displayed for 10 seconds.
For information on how to update your multi-function display software,
please refer to the instructions on the Raymarine website, or contact
Raymarine technical support.
Warranty
To register your new Raymarine product, please take a few minutes to fill
out the warranty card. It is important that you complete the owner infor-
mation and return the card to receive full warranty benefits. Alternatively
you can register your product on line at www.raymarine.com
Handbook information
The technical and graphical information contained in this handbook, to the
best of our knowledge, was correct as it went to press. However, our policy
of continuous improvement and updating may change product specifica-
tions without prior notice. As a result, unavoidable differences between the
product and handbook may occur from time to time.
3
Hide quick links:
Advertisement
Table of Contents
