Toshiba XD-E500KU Owner's Manual page 32

stomizing the Function Settings (continued)
[ Setting details
Digital Output
C@:>(@)C@
Sharp: Select this to make the picture sharper.
Color: Select this to make the picture sharper with enhanced
color.
Contrast: Select this to make the picture sharper with bigger
contrast.
Off: Select this to follow the original picture setting.
Night Mode
C@:>c@.:)(:.@
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
Parental Control
c.@>
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press .. 1T button to select Audio.
3) Press
~
button, then use the ..
1
T button to select
Night Mode.
4) Press ENTER button, then use
the"l
T button to select
On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
DVDs equipped with the password function are rated according
to their content. The contents allowed by a parental lock level
and the way a DVD can be controlled may vary from disc to disc.
For example, if the disc allowed, you could edit out violent scenes
unsuitable for children and replace them with more suitable
scenes, or you could lock out playback of the disc altogether.
• DVDs mayor may not respond to the parental lock settings.
This is not a defect in the DVD player. Make sure this function
works with your DVDs.
1) Press SETUP button.
2) Press .. 1 T to
select Rating.
3) Press
~
button to
select Parental iDl
VIdeo
control, then press
ENTER button.
"Enter Password"
screen will appear.
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press ..
1
T button to select Audio.
3) Press
~
button, then use the .. 1 T button to select
Digital Output.
4) Press ENTER button, then use
the"l
T button to select
the output sound
format (Off, PCM
or Bitstream).
5) Press ENTER
button.
6) Press SETUP
button to exit the
menu.
PCM: Select when
'j;eJMisc
connected to a Multi-
channel digital stereo
amplifier. The DVD player outputs sound in the PCM stereo
format when you playa DVD recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
"Bitstream" if your amplifier supports "DTS".
Off: To disable Digital Output.
Notes
When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analog audio jacks,
select "PCM" or "Bitstream".
• If this DVD player is connected to a TV using HDMI,
make sure to select "PCM".
1
32