Toshiba XD-E500KU Owner's Manual page 31

View Mode
C@:>
HOMI Resolution
•
1) Press SETUP button.
2) Press A /,. button to select Video.
3) Press
~
button, then use the A / ,. button to select
HOMI Resolution.
4) Press ENTER button, then use the A/" button to select
the options (Auto,
480p, nop, 1080i,
1080p or 1080pl
24F).
5) Press
ENTER
button.
6) Press SETUP
button to exit the
menu.
JPEG Interval
Notes
• If the Video Output is not set to "HDMI", you cannot select
the "HDMI Resolution".
• When the picture mode is Sharp, Color or Contrast, HOM I
resolution cannot be set to 480p and 720p.
• Select the HDMI resolution according to the performance
of the connected TV.
1) Press SETUP button.
2) Press A /,. bullon to select Video.
3) Press ~ button, then use the A / ,. button to select
JPEG Interval.
4) Press ENTER button, then use the A /,. button to shift
and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off:
Plays back one file at a time.
5
seconds: Plays back images in the form of a slide show
at 5 seconds interval.
10
seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15
seconds: Plays back images in the form of a slide show
at 15 seconds interval.
Picture Modes
1) Press SETUP button.
2) Press A /,. button to select Video.
3) Press ~ button, then use the A / ,. button to select
Picture Modes.
4) Press ENTER button, then use the A /,. button to select
picture mode (Sharp, Color, Contrast or Off).
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Select when a standard 4:3 TV is
connected. Displays pictures cropped
to fill your TV screen. Either or both sides
of the picture are cut off.
Automatically fit the decoded image on
screen without distortion. Black bars will
be present on top/bottom or left/right of
screen.
The user may select one of the following options:
Fill: Fill the screen with decoded image.
Original: Display image as it original size. "Original" is
preferred for Jpeg viewing.
Auto Fit: Automatically fit the decoded image on screen
without distortion.
Pan Scan: Automatically display decoded image on full
screen without distortion.
1) Press SETUP button.
2) Press A /,. button to select Video.
3) Press
~
button, then use the A / ,. button to select
View Mode.
4) Press ENTER
button, then use
the A / ,. button to
select the options
(Fill, Original, Auto
Fit or Pan Scan).
IIJ
Rating
5) Press ENTER
button.
*;.
Mise
6) Press SETUP
button to exit the menu.
Pan Scan
Auto Fit
Note: Depending on the DVDs, you may not be able to view
the mode as selected.
Video Output C@:>~~
1) Press SETUP bullon.
2) Press A /,. bullon to select Video.
3)
Press ~ bUllon, then use the A / ,. button to select
Video out.
4) Press ENTER bullon, then use the A / ,. bullon to select
the output mode (Component, S-VIDEO, P-Scan or HDMI).
5) Press ENTER
button.
6) Press SETUP
button to exit the
menu.
Component:Select if
you connect the DVD to
fij
RlIting
your TV which has
component video
""Mis<
inputs.
S-VIOEO: Select if you
connect the DVD to yourTV via S-video input.
P-Scan: Select if you connect the DVD to your TV which has
component video inputs that support progressive scan.
HOMI: High Definition Multimedia Interface. Select if you connect
the DVD to TV via HDMI input.
" - - - - - - - - - - - - - - - - - - - - - - - - - - - '