Indicator
Name
Electric Power
Steering (EPS)
System Indicator
Low Tire
Pressure/TPMS
Indicator
Turn Signal and
Hazard Warning
Indicators
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
On/Blinking
Comes on when you turn the ignition switch to
●
ON
(
w
*1
, and goes off when the engine starts.
Comes on if there is a problem with the EPS
●
system.
Comes on for a few seconds when you turn the
●
ignition switch to ON
*1
, then goes off.
(
w
May come on briefly if the ignition switch is
●
turned to ON
*1
and the vehicle is not moved
(
w
within 45 seconds, to indicate the calibration
process is not yet complete.
Comes on and stays on when:
●
- One or more tires' pressures are determined to
be significantly low.
- The system has not been calibrated.
Blinks for about one minute, and then stays on if
●
there is a problem with the TPMS, or when a
compact spare tire is temporarily installed.
The turn signal indicators blink when you operate
●
the turn signal lever.
If you press the hazard warning button, both
●
indicators and all turn signals blink at the same
time.
Explanation
Stays on constantly or does not come on at
●
all - Have the vehicle checked by a dealer.
2 If the Electric Power Steering (EPS) System
Indicator Comes On P. 520
Comes on while driving - Stop in a safe
●
place, check tire pressures, and inflate the
tire(s) if necessary.
Stays on after the tires are inflated to the
●
recommended pressures - The system needs
to be calibrated.
2 TPMS Calibration P. 434
Blinks and remains on - Have the vehicle
●
checked by a dealer. If the vehicle is fitted with
a compact spare, get your regular tire repaired
or replaced and put back on your vehicle as
soon as you can.
Does not blink or blinks rapidly - A turn
●
signal light bulb has blown. Change the bulb
immediately.
2 Replacing Light Bulbs P. 477, 479
uuIndicatorsu
Continued
71