Honda Accord Coupe 2014 Owner's Manual page 479

Front Turn Signal/Side Marker Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal/Side Marker Light: 28/8 W (Amber)
Holding Clip
Screw
Socket
Bulb
Side Turn Signal/Emergency Indicator Light Bulbs
Door mirrors have the side turn lights. Have an authorized Honda dealer inspect and
replace the light assembly.
* Not available on all models
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips and screw, and
pull the inner fender back.
3. Turn the socket to the left and remove it.
4. Remove the old bulb and insert a new bulb.
uuReplacing Light BulbsuFront Turn Signal/Side Marker Light Bulbs
1Front Turn Signal/Side Marker Light Bulbs
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Central pin
Insert the clip with the central pin raised, and push
until it is flat.
*
Push until the
pin is flat.
477