Honda H5518H Owner's Manual page 77

f. Install the universal shaft. (P.T.O.
driven attachments)
l
With the lock on the tractor
side fully depressed, insert the
universal shaft fully into the
P.T.O. hole.
P.T.O. HOLE
l
Release the lock, pull out the
joint slowly until the lock
returns to the position shown
in the diagram.
l
Move the universal shaft back
and forth and check that the
lock is secure.
UNIVERSAL SHAFT
UNIVERSAL SHAFT
g. Use the turnbuckle adjuster on the
right side of the lift rod to get the
attachment horizontal. After ad-
justing, secure with a lock nut.
SHAFTLOCK
CH
LIN
--!I-
1 cm IO.4 in)
pGiq
l
After installing the attachment, check that the lock pins are securely in
place.
l
If there is noise from the universal shaft while driving, adjust the length
of the top link slightly. If there is excessive noise from the universal
shaft when in use, damage can be caused to P.T.O. section.
l
If the check link is adjusted too tightly, it may break.
l
Use only attachment designed for use with this tractor.
75