American Standard Roxalyn 00194.225 Parts List

0194.225

EXPOSED BRACKET SUPPORT VARIATION

121mm
(4-3/4)
FINISHED
222mm
WALL
(8-3/4)
222mm
(8-3/4)
© 2008 AS America Inc.
406mm
(16)
51mm (2)
SUGGESTED
29mm
(1-1/8)
13mm x 51mm BRACKET
(1/2 x 2) SLOTS
35mm (1-3/8)
DIA. PUNCHING
C/L
457mm
(18)
508mm
(20)
86mm
(3-3/8)
787mm
FINISHED
FLOOR

NOTES:

*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP
ARE SUGGESTED.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
CONCEALED ARMS SUPPORT & EXPOSED BRACKET SUPPORT TO BE
FURNISHED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
0194.092

CONCEALED ARMS SUPPORT VARIATION

DIA. PUNCHING
FINISHED
222mm
WALL
(8-3/4)
(6) 25mm (1) DIA.
ACCESS HOLES
222mm
(8-3/4)
54mm(2-1/8) DIA.HOLES
(31)
FOR CONCEALED ARMS
M15
ROXALYN™
WALL-HUNG LAVATORY
35mm (1-3/8)
102mm
(4)
121mm
(4-3/4)
C/L
508mm
(20)
419mm
(16-1/2)
86mm
(3-3/8)
203mm
178mm
(8) SUPPLIES
(7)
AS REQ'D.
*
1-1/4 O.D. 419mm
WASTE (16-1/2)
1-1/4 O.D.
TAILPIECE
VITREOUS CHINA
51mm (2)
SUGGESTED
51mm(2)
178mm
(7)
457mm
(18)
178mm
(7)
44mm(1-3/4)
*
273mm
(10-3/4)
787mm
(31)
FINISHED
FLOOR
Revised 8/05