Table of Contents
Advertisement
Main Menu
Table of Contents
To Play a CD
With the ignition switch in the
ACCESSORY (I) or ON (II) position,
insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way and begin to play it. The
number of the track playing is shown
in the display. The system will
continuously play a CD until you
change modes.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
Each time you press and
SKIP
release the
side of the skip bar,
the player skips forward to the
beginning of the next track. Press
and release the
side of the bar
to skip backward to the beginning of
the current track. Press it again to
skip to the beginning of the previous
track.
To move rapidly within a track, press
and hold the
or
You will see CUE or REW in the
display.
To continuously replay
REPEAT
a track, press and release the RPT
button. You will see RPT in the
display. Press it again to turn it off.
This feature plays the
RANDOM
tracks in random order. To activate
Random Play, press and release the
RDM button. You will see RDM in
the display. Press it again to return
to normal play.
To Stop Playing a CD
Press the eject button (
remove the CD. If you eject the CD,
but do not remove it from the slot,
the system will automatically reload
the CD after 15 seconds and put it in
pause mode. To begin playing, press
the CD button.
Press the AM/FM button to switch
to the radio while a CD is playing.
side.
If you turn the system off while a CD
is playing, either with the PWR/VOL
knob or by turning off the ignition
switch, the CD will stay in the drive.
When you turn the system back on,
the CD will begin playing where it
left off.
Playing a CD
) to
89
Advertisement
Chapters
Table of Contents
