Replacing Bulbs - Honda 2000 Civic Coupe Owner's Manual

Main Menu
Table of Contents
Lights
5. Remove the burned out bulb from
the socket by pushing it in and
turning counterclockwis e until it
unlocks.
6. Install the new bulb in the socket.
Turn it clockwise to lock it in place.
7. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
8. Test the lights to make sure the
new bulb is working.
9. Put the inner fender cover in place.
Install the holding clip and tighten
it securely.
Maintenance
Replacing Rear Bulbs
(in Fenders)
1. Open the trunk.
Undo the fastener on the side of the
trunk lining by pushing on the center
of the fastener' s head until it pops in.
Pull the lining back.
2. Determine which of the two bulbs
is burned out: stop/taillight/side
marker light or turn signal light.
3. Remove the socket by turning it
one-quarter turn counterclockwise .