BenQ W1300 User Manual page 53

FUNCTION DESCRIPTION
There are several options to set the image's aspect ratio depending
Aspect Ratio
on your input signal source. See
43
Corrects any keystoning of the image manually. See
Keystone
keystone" on page 30
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower
position of the page change with every key press you made until they
Position
reach their maximum or minimum.
This function is only available when a PC signal (analog RGB) is
selected.
Conceals the poor picture quality in the four edges. You can also
manually press
Overscan
means the picture is 100% displayed. The greater the value, the more
Adjustment
portion of the picture is concealed while the screen remains filled
and geometrically accurate.
H. Size
Adjusts the horizontal width of the picture.
Phase
PC &
Adjusts the clock phase to reduce picture
Component
distortion.
YPbPr Tuning
Auto (Only for RGBHD PC Timing)
Adjusts the phase, and frequency automatically.
Magnifies or reduces the projected image. See
Digital Zoom
searching for details" on page 45
for details.
for details.
/ to decide how much to be concealed. Setting 0
This function is only available when the PC signal (analog RGB) is
selected.
This function is only available when the PC
signal (analog RGB) is selected.
This function is only available when the PC signal is selected.
"Selecting the aspect ratio" on page
"Correcting
"Magnifying and
for details.
Operation 53