D-Link AirPlus G+ DI-824VUP+ Manual page 44

Using the Configuration Menu
Advanced > Filter > MAC Filters
MAC (Media Access Control) Filters are used to allow or deny LAN (Local Area Network)
computers from accessing the Internet and network by their MAC address.
At the bottom of the screen, there is a list of MAC addresses from the DHCP client
computers connected to the DI-824VUP+. To use them, select one from the drop down
list. Then click the "Apply" button and the DI-824VUP+ will fill in the appropriate information
to the list.
Disabled MAC Filter
Select this option if you do not want to use MAC filters.
Only allow computers with MAC address listed below to access the network
Select this option to only allow computers that are in the list to access the network
and Internet. All other computers will
Internet.
Only deny computers with MAC address listed below to access the network
Select this option to only deny computers that are in the list to access the network
and Internet. All other computers will be allowed access to the network and Internet.
MAC Address
Enter the MAC Address of the client that will be filtered.
be denied access to the network and
44