D-Link AirPlus G+ DI-824VUP+ Manual page 148

Frequently Asked Questions (continued)
How do I set up my DI-824VUP+ to use iChat? -for Macintosh users-
(continued)
Step 3
Create a new firewall
rule:
Click Enabled.
Enter a name (ichat1).
Click Allow.
Next to Source, select
WAN under interface.
In the first box, enter an *.
Leave the second box
empty.
Next to Destination, select
LAN under interface.
Enter the IP Address of the
computer you are running
iChat from.
Leave the second box empty. Under Protocol, select UDP. In the port range boxes,
enter 5060 in the first box and leave the second box empty.
Click Always or set a
schedule.
Step 4
Click Apply and then
Continue.
Step 5
Repeat steps 3 and 4 enter
ichat2 and open ports 16384-
16403 (UDP).
148