AC/DC power supply (if required)
1. Connect the interface cable to the scanner.
2. Connect the DC barrel plug into the side of the
connector, or into the DC power connector.
3. Connect the interface cable to the host terminal.
4. Plug the AC/DC power supply into a functional AC
outlet.
Power up the system and scan a few items to verify that data is
properly communicated between the scanner and your POS termi-
nal.
Figure 11. Connecting the Scanner to the Host Terminal
a. Interface Connector
b. DC Power Connector
c. Host Terminal Connector*
*Your Host Terminal Connector may vary from illustration
User's Guide
d. To Host Terminal
e. Interface Cable
f. AC/DC Power Supply
21