Lenovo ThinkPad T440p User Manual page 124

Table 4. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)
CPU
108
User Guide
Submenu item
Intel Rapid Start
Technology
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Core Multi-Processing
Intel (R) Hyper-Threading
Technology
Value
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
• Disabled
• Enabled
• Enabled
• Disabled
• Compatibility
• AHCI
• Disabled
• Enabled
• Disabled
• Enabled
Comments
To use this feature, a special
partition on the solid-state
drive is required.
When enabled, the
computer enters a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enable or disable keyboard
beep when unmanageable
key combinations are
pressed.
Select a SATA Controller
Mode.
Select Enabled to enable
additional execution core
units within a CPU.
Select Disabled to enable
only one execution core
unit within a CPU.
Select Enabled to enable
additional CPU threads.
These threads appear as
additional processors but
share some resources with
the other threads within a
CPU.
Select Disabled to enable
only one threads within
each execution core unit.