Initial Setup; Internet Access; Running Initial Setup; Information You Need - Samsung 6300 User Manual

()' Initial Setup
When you turn on your 1V for the first time, it immediately starts the Initial Setup.
During Initial Setup, connects to your home network, implements Smart Hub
agreements, links to the source of your live 1V signal, and sets up control of your set-
top or satellite box.
Information You Need
Have the following information on hand
before you turn on your 1V for the first
time:
Your wireless network's password.
(Make sure your network is on .)
Your Postal or Zip code.
The name and location of your cable
or satellite provider (if you use one).
Running Initial Setup
1
Plug your 1V into a wall outlet.
~
Aim the Remote Control at the 1V.
Internet Access
The 1V must be connected to the Internet
to use the Smart Features. If you have
a wireless network, confirm that your
network router is working before you
start the initial setup. If you have a wired
network, connect the 1V to the network
with an Ethernet cable before you begin
(CAT 7 cable preferred).
3
Press the
TV
button on the Remote
Control to turn on the 1V, and then
follow the directions on the screen .
To learn more about operating your 1V and its Smart Features, see your 1V's user's
manual or launch the 1V's built in e-Manual. Congratulations on the purchase of your
new Smart 1V!