Sony STR-K680 Service Manual page 10

STR-K680/K780
Name
R Control
buttons
S DISPLAY
T -/--
>10/
x
CLEAR
U Numeric
buttons
(number 5*)
V 2CH
W A.F.D.
X AUTO CAL
10
Function
After pressing AMP MENU
(D), DVD MENU (J), or
MENU (N), press the control
button V, v, B or b to select
the settings. When you press
DVD MENU or MENU, press
the control button to enter the
selection.
Press to select the information
displayed on the TV screen of
the VCR, satellite tuner, CD
player or DVD player.
Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
Press to
– clear a mistake when you
press the incorrect numeric
buttons.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
Press to
– preset/tune to preset
stations.
– select track numbers of the
CD player or DVD player.
Press 0/10 to select track
number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (P) at the same time to
select the TV channels.
Press to select 2CH STEREO
mode.
Press to select A.F.D. mode.
Press to activate the Auto
Calibration function.
Name Function
Y TV/VIDEO
Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
Some functions explained in this section may not
work depending on the model.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.