D-Link AirPlus G DWL-G510 Manual page 16

Configuration Utility (continued)
Advanced
r
Frequency: Select 802.11b/g for compatibility with both 802.11b or 802.11g networks,
or select 802.11b only.
Ad Hoc Channel:
When communicating in Ad Hoc mode, all devices must share the same channel.
Profile IP Settings:
here. If you select Disable you will need to configure the IP address information each
time you connect to a network. If you select Enable, you will maintain the same IP
address information each time you connect to a network.
Power Mode:
Disable - This default setting consumes the most power.
Enable - This setting consumes the least power.
Launch Utility on Start Up:
Click Apply to save the changes.
Select the Ad Hoc channel when in Ad Hoc mode.
You can Enable or Disable the IP Settings portion of your profile
Select Enable or Disable.
16