Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
Integrated NIC 2
Serial Port
SATA Operation
T3610 and T5610
Drives
T3610 and T5610
Description
Allows you to configure the integrated network controller. The options
are:
•
Disabled
NOTE: You can use the Disabled option, only if Active
Management Technology (AMT) option is disabled.
•
Enable UEFI Network Stack
•
Enabled (Default)
•
Enabled w/PXE
Allows you to control on-board LAN controller. The options are:
•
Enable (Default)
•
Enable w/PXE
NOTE: This feature is supported only on T7610
Identifies and defines the serial port settings. You can set the serial port
to:
•
Disabled
•
COM1 (Default)
•
COM2
•
COM3
•
COM4
NOTE: The operating system may allocate resources even if the
setting is disabled.
Allows you to configure the internal SATA hard-drive controller. The
options are:
•
Disabled
•
ATA
•
AHCI (Default)
•
RAID On
NOTE: SATA is configured to support RAID mode. No SATA
operation support in T7610.
Allows you to configure the SATA drives on board. The options are:
•
SATA3–HDD0
Description
Allows you to set the date and time. The
changes to the system date and time takes
effect immediately.
41