American DJ X-Treme/19C User Instruction page 5

X-treme controller

User Instructions - X-Treme/19C™

4. To unlock a slider while in the Copy mode, you must:

a. Use the slider to make a "high/low" signal by moving the desired function slider up to the

maximum (10), then down to the minimum (0). This will "unlock" that function slider to

allow you to make adjustments.

b. Repeat this process to unlock all the functions you want to change.

5. When you have made all of the adjustments to that projector, press the Projector (1)key again.

The Projector LED will stop flashing. That projector is now set.

6. Repeat steps 1 through 5 until all the projectors have been adjusted.

7. Press the Enter (10) key to go onto the next step.

Helpful Hint: If you forgot to copy a step, use the Down (8) key to return

to the last step, then press the Enter (10) key for 5 seconds and copy the scene again.

Editing Show Programs

To review a show manually:

1. Press the Show (3) key.

2. Use the Up/Down (8) keys to step through the show.

Editing

1. Select a Show (3) memory to be edited.

2. Use the Up and Down (8)keys to move through the memory to the step you wish to change.

3. Select the Projector (1) you want to add or change. The Projector LED will start to blink.

4. Make changes to motion or colors, then press the Projector (1)key again. The Projector LED

will stop flashing.

5. Press the Enter (10) key. The change is now completed.

Inserting a Step

1. Select Show (3) memory to be edited.

2. Use the Up and Down (8) keys to move through memory to where you wish to

insert a step.

3. Follow Basic Play to set-up the scene you want.

4. Press the Insert (6) Key.

5. Press Enter (10) . The step is now saved.

6. Repeat steps 1 through 5 as required.

Deleting a Step

1. Select a Show (3) memory to be edited.

2. Use the Up and Down (8) keys to move through the memory to the step you wish to delete.

4. Press the Delete (7) Key. That step is now deleted.

5. Repeat steps 1 through 4 as required.

Clearing Show Memory

1. Press the Show (3)and Delete (7) keys at the same time.

2. The Show LED will flash very quickly

American DJ