American DJ X-Treme/19C User Instruction page 2

X-treme controller

User Instructions - X-Treme/19C™

Introduction

The X-TREME 19C gives you the power to easily control moving lights or other DMX512 devic-

es. It can be operated in a traditional step-by-step linear method. However, you will really start to

save time when you learn to use the pre-programmed motions. This will open up tremendous cre-

ative options by taking advantage of X-Treme/19C's modular programming capabilities. Modular

programming is fast, powerful and eliminates most of the tedious work associated with program-

ming.

Features

• 64 channel DMX 512 output.

• Ergonomic joystick control of pan/tilt motion.

• 56 professionally designed pan/tilt motions.

• 6 Show memories of 300 steps.

• Show memories can be chased for long concerts.

• Instant manual override and control of all projectors and functions

• Built-in gobo & color chases

• Quick, intuitive modular programming

• Motions can be placed in any location

• Standard rack mount design

• Rugged extruded aluminum case

• Convenient 3 unit 19" rack mount design

Getting Started:

1. Unpack and inspect X-TREME 19C. The box should include:

a. X-Treme/19C

b. Power cord

c. User manual

2. Mount the X-TREME 19C on a suitable rack.

3. Attach power cord and plug into properly grounded socket.

Check to make sure that the voltage marked on the X-TREME 19C is correct for your area.

4. Connect X-TREME 19C to DMX512 equipment with proper cabling. See the "DMX Basics"

manual on the importance of correct, high-quality cables.

5. Assign DMX addresses for each X-TREME that will be controlled by the X-TREME 19C. See

the reference table at the back of this manual for addressing chart.

American DJ