JVC KD-X80BT Instructions Manual page 25

Menu item
PRO EQ
Fad/Bal *6*7
Loud
(Loudness)
Volume Adjust
Subwoofer On/
Off
Subwoofer LPF *8
Subwoofer
Level *8
Subwoofer
Phase *8
HPF
(High-pass filter)
Beep
(Keytouch tone)
Amplifier Gain
SSM
Area Change
(Frequency
tuning interval)
IF Band
(Intermediate
frequency band)
Sirius ID
Blend Hold
Stereo/Mono
Radio Timer *9
*6 If you are using a two-speaker system, set the fader level to "0".
*7 This adjustment will not affect the subwoofer output.
*8 Displayed only when <Subwoofer On/Off> is set to <On>.
*9 Not available when JVC KT-HD300 HD Radio tuner box is connected.
Selectable setting (Initial: [XX])
For settings, page 23.
R6 — F6 [0]: Press /
L6 — R6 [0]: Press /
On: Boosts low and high frequencies to produce a well-balanced sound at a
low volume level.
[Off]: Cancels.
Level -5 — Level +5 [Level 0]: Presets the volume adjustment level of
each source, compared to the FM volume level. Before adjustment, select
the source you want to adjust. ("FIX" appears if "FM" is selected.)
[On]: Turns on the subwoofer output.
Off: Cancels.
LOW 55Hz/MID 85Hz/[HIGH 120Hz]: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
00 — 08 [08]: Adjusts the subwoofer output level.
[0 Deg] (normal)/180 Deg (reverse): Selects the subwoofer phase.
LOW 100Hz/MID 120Hz/HIGH 150Hz: Activates the High Pass Filter.
Audio signal with frequencies lower than 100 Hz/120 Hz/150 Hz are cut off
from the front/rear speakers.
[Off]: Deactivates. (All signals are sent to the front/rear speakers.)
[On]/Off: Activates or deactivates the keypress tone.
Off: Deactivates the built-in amplifier.
Low Power: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[High Power]: The maximum volume level is 50.
For settings, page 7. (Displayed only when the source is "FM" or "HD
Radio".)
[US]: For North/Central/South America, AM/FM intervals: 10 kHz/200 kHz.
EU: For any other areas, AM/FM intervals: 9 kHz/50 kHz.
SA: For some South American countries, AM/FM intervals: 10 kHz/50 kHz.
[Auto]: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
The 12-digit SIRIUS identification number appears on the display. (Displayed
only when SIRIUS Satellite Radio is connected.)
For settings, page 8. (Displayed only when the source is "HD Radio".)
Displayed only when the source is "FM" or "HD RADIO".
[Stereo]: Enables stereo FM reception.
Mono: Improves the FM reception but stereo effect will be lost.
For settings, page 7.
to adjust the front and rear speaker output balance.
to adjust the left and right speaker output balance.
Menu operations
ENGLISH | 25