Table of Contents
Advertisement
7.4 Copying a recording
You can record the file in whole or in part during a playback
by performing the following steps:
7.5 Formatting the hard disk
If a new hard drive is installed, it must be formatted because
you can neither record nor use time-shift with an unformatted
hard disk.
You can delete permanently all contents stored in a hard drive
by formatting it. Select the Installation > System Recovery >
Format Hard Disk menu, and then select the hard drive you
want to format. To format the built-in hard drive, select the
option to Internal; otherwise to format the external hard drive
which is connected to the digital receiver, select the option to
External. With pressing the
firmation. Formatting will start with the choice of Yes.
NOTE
The hard drive on the digital receiver will be formatted in
the JFS file system.
1. Start playback of a recording you want.
2. Move to a scene from which you want to start copying by
holding down the
3. Press the
button, then it will be copied in a new file
which is named after the original recording with a suffix
of 'COPY' and a number.
4. To stop copying, press the
7.4 Copying a recording 59
or
button.
button.
£
¢ ¡
button, you get asked for con-
OK
Advertisement
Table of Contents
