Switching On For The First Time; Powering On And Checking Picture - Topfield TF 500 PVRc User Manual

16 Setup
2.6 Switching on for the first time

2.6.1 Powering on and checking picture

used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
Now that you have your digital receiver connected, you should
plug it into a mains socket. Ensure that your television set is
turned on, so that you will be able to see the display from the
digital receiver.
Now, press the
trol. After about 10 seconds you should see a picture showing
a menu. If you do not see a picture, check that the television
is set to the correct input. If the picture is good, you can skip
to § 4.1 to search for the available television and radio services.
Otherwise, you may need to temporarily connect the compos-
ite video connector (VIDEO) to your television set so that you
can see the on-screen menus in order to configure the video
settings.
button in top left corner on the remote con-