Automatic Choke Adjustment - Honda EM500 Owner's Manual

Automatic choke adjustment
1. Loosen the automatic choke setting bolt.
2. Push the choke valve arm at the carburetor so the choke valve is closed.
3. Adjust distance "A" to 3 mm (0.12 in) by relocating the bimetal strip.
Retighten the bolt securely.
NOTE:
l
Recheck distance A after tightening the bimetal strip.
l
Hard starting or lack of power will result if not adjusted properly.
CHOKE VALVE ARM
SETTING BOLT
CARBURETOR
AUTOMATIC CHOKE
BIMETAL STRIP
20