The screen is for information only, parameters cannot be changed on this
screen.
Received
S ignal
S trength
I ndicator (RSSI)
This menu allows you to check the inbound strength parameters.
Operations Sequence:
Click "ENTER" to enter the "Inputs" menu, select "RSSI" then click
"ENTER". The display will show something like this:
The screen is for information only, parameters cannot be changed on this
screen.
Setting
U p
S atellite
I nbound
( DVB-‐S2)
This menu allows you to configure the Satellite Receiver. The parameters
must be known before starting. (Please contact your satellite provider if
you don't have them)
Operations Sequence:
Click "ENTER" to enter the "Inputs" menu, select "DVB-S2" then click
"ENTER". The display will show something like this:
UC-IRD+ MULTI-MODE RECEIVER / DECODER
Tuner Unlock
Strength -95.0dBm
LNB Frequency
5150MHz
8