Controls And Features - GE Custom Hood Inserts Owner's Manual

Controls
NOTE: Avoid using food products that produce
flames under the range hood.
1. FAN DECREASE ON/OFF. Press to turn on and
2. FAN INCREASE ON/OFF. Press to turn on and
3. LIGHT DECREASE ON/OFF. Press to turn on
4. LIGHT INCREASE ON/OFF. Press to turn on
5. POWER ON/OFF. Press to activate (turn on)/
decrease fan settings. It remembers the last
fan level used. The buttons allow you to cycle
around to the desired setting. (Use to set the fan
speed to LOW, MED, HIGH, BOOST or OFF.)
increase fan settings. It remembers the last
fan level used. The buttons allow you to cycle
around to the desired setting. (Use to set the fan
speed to LOW, MED, HIGH, BOOST or OFF.)
The hood fan will
automatically turn on at the MED setting (or it
will increase if already set to MED) if cooking
temperatures become too hot. The fan will stay
on for a minimum of 3 minutes and will turn off
when temperatures cool to an appropriate level.
While the Sensor Feature is actively operating
the fan, the blue LEDs around the control
buttons will be flashing. While the blue lights are
flashing, you may continue to operate the light
levels and you can increase the fan speed, but
you cannot decrease the fan speed or turn it off.
The fan is protecting both the electronics and
your cabinet. Reducing the heat will allow for
normal operation of the hood.
and dim the lights. It remembers the last light
level used. The buttons allow you to cycle
around to the desired setting. (There are four
light levels/settings and OFF.)
and brighten the lights. It remembers the last
light level used. The buttons allow you to cycle
around to the desired setting. (There are four
light levels/settings and OFF.)
deactivate (turn off) the control buttons. When
the buttons are active (turned on), their outer
rings will be illuminated. When active (turned
on), the hood lights and fan will automatically
turn on at their last settings.
NOTES:
• Always deactivate (turn off) the buttons when
the hood is not in use.
• If both the LIGHT and FAN are set to OFF, the
buttons will automatically deactivate (turn off)
after 10 seconds.

Controls and Features

Custom Hood Insert
1 2 3 4 5
5