LG 23LC1RB-MB Service Manual page 6

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to ML-041G chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature: 25°C ± 2°C
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than
30min.
(5) Adjusting standard for this chassis is followed a special
standard.
3.General Specification
LCD Module Feature
SPECIFICATION
Type TFT Color LCD Module
Active Display Area 22.95inch(582.96mm) diagonal
Pixel Pitch[mm] 0.124mm(H) x 0.372mm(V) x RGB
Electrical Interface TFT
Color Depth 8bit, 16,7M color
Size[mm] 546(H) x 318.3(V)x42.1(D)
Surface Treatment Hard Coating(3H), Anti-glare treatment of the front polarizer
Operating Mode Normally Black
Back light Unit 6CCFL(6 lamps)
R/T Typ 17ms(R.T. : 8ms + F.T. : 9ms)
- 6 -
LPL