Set-Up; Portable Audio/Handheld Game Device Connection - Pyramat S2000 SOUND ROCKER Owner's Manual

SET-UP

1
Unfold the top portion of the
Sound Rocker until the backrest
is flush with the seat portion.
Secure velcro tab on the bottom
of the rocker.
4
Twist the volume knob to click
on the power.
PORTABLE AUDIO/HANDHELD GAME DEvICE
CONNECTION
Use the 3.5mm mini plug to connect to an MP3 player, an iPOD
game device such as Nintendo DS
1
Turn the source knob on the
control panel to MP3.
2
Place the Sound Rocker so
that the control panel is less than
9 ft./2.75 meters from the power
source.
5
Check the speakers on top to
see if the speakers are lit up. Twist
volume knob to power off the
Sound Rocker, then proceed to the
connection method shown below
for your audio/video device.
, Nintendo DS Lite
®
2
Slip your player into the MP3
holster on the side of the Sound
Rocker.
3
Connect the 12-volt DC power
adapter to the electrical outlet and
then to the power DC port on the
control panel.
, and PSP
®
3
Connect the device to the
Sound Rocker with the 3.5mm mini
plug from inside the pocket.
Note: If your handheld game
device does not have a headphone
jack it is not compatible with the
Sound Rocker.
3
CAUTION:
Keep
fingers clear of the folding seam
when folding or unfolding the
rocker.
, or a handheld
®
.
®
CAUTION:
Power
off all audio/video devices prior to
proceeding with the Sound Rocker
connection method.