Optimus CD-3520 Owner's Manual page 16

42-5065.fm Page 16 Thursday, August 12, 1999 9:47 AM
4. Press
MEMORY/TIME
selected track number. The selec-
tion number advances by one and
the track number on the display
returns to .
00
5. Repeat Steps 3 and 4 for each
track you want to program, up to
24 tracks.
Note: If you try to store more than
24 tracks in memory,
appears on the display.
6. To play the
sequence, press
lights steadily and the first track in
the sequence plays.
While the programmed sequence
plays, you can use
forward or to move backward
in the sequence.
7. After the last programmed track
ends, the CD player stops. To
manually stop the CD before the
end of the sequence, press
.
CLEAR
Notes:
• To replay
sequence, press
within 2 minutes after the CD
player stops. Otherwise, the CD
player turns off and clears the
programmed sequence.
• To check the
sequence, press
within 2 minutes after the CD
player stops. The display shows
the number of the first pro-
grammed track. Each time you
16
to store the
FuLL
programmed
. M
PLAY/PAUSE
to move
STOP/
the program
PLAY/PAUSE
programmed
MEMORY/TIME
press
MEMORY/TIME
play shows the number of the
next track in the sequence.
• To add to the end of a pro-
grammed sequence, repeatedly
press
MEMORY/TIME
number 00 appears on the dis-
play. Then follow Steps 3 and 4.
To clear the programmed se-
quence from memory,
twice.
STOP/CLEAR
, the dis-
until track
press