Unpacking - NuDAQ PCI-7230 User Manual

2.2 Unpacking

Your PCI-7230, cPCI-7230, PCI-7233, PCI-7233H or PCI-7234 card contains
sensitive electronic components that can be easily damaged by static
electricity.
The card should be done on a grounded anti-static mat. The operator should
be wearing an anti-static wristband, grounded at the same point as the
anti-static mat. Inspect the card module carton for obvious damage. Shipping
and handling may cause damage to your module. Be sure there are no
shipping and handing damages on the module before processing.
After opening the card module carton, extract the system module and place it
only on a grounded anti-static surface component side up.
Again inspect the module for damage. Press down on all the socketed IC's to
make sure that they are properly seated. Do this only with the module place on
a firm flat surface.
Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your PCI Card.
Installation 13